Sandvik Coromant 6351803 CoroDrill® 800 Right Hand STS With Indexable Inserts, 5.3937 in, 6.1811 in Dia Max Drill
Drill Heads
1228913
MFG #: 6351803
Sandvik Coromant
6481.82000
/ ea
- Catalog Number: 6351803
- Country of Origin: US
- Gross Weight Per Pack: 36.3000 lb
- Number of Non~Pilot Inserts: 285 mm
- Series: CoroDrill® 800
- Type: Right Hand STS
- UPC 11: 69826274137
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Back of Head Diameter: CoroDrill® 800
- Head Connection Size: 5.3937 in
- Insert Holding Method: 40 to 60 deg Screw Clamping
- Maximum Drill Diameter: 6.1811 in
- Overall Length: 11.2205 in
- Pilot Drill Diameter: 40 - 60 deg Screw Clamping
- Pilot Drill Style: 285 mm
- Pilot Type: CoroDrill® 800
In deep hole machining, a combination of tool design and cutting fluid pressure is used to evacuate the chips out of the hole. Both the Single tube system and Ejector drill system can produce holes with excellent surface finish, close dimensional tolerance and concentricity. CoroDrill® 800 with central insert L-geometry adds to excellent chip formation and evacuation.
- Features
| SZ 23 STS head machine side compatibility |
| 800-08 T3 08M-I-G, 800-12 T3 08M-C-G, 800-12 T3 08M-I-G, R424.9-1806 compatible inserts |
| 2.5 mm adjustment limit |
| Axial concentric coolant entry |
| Axial concentric coolant exit |
| 265.4 mm L functional |
| 132.4 mm overhang |
| 19.6 mm L point |
| 400 r/min |
| IT10 achievable hole tolerance |
| 801.20..D tool style |
| Excellent surface finish |
| Process security |
| Good concentricity |
| Excellent chip control and evacuation thanks to central insert L-geometry |
| Laser marking of code, dimension and tube range |
| Excellent chip control in both low and high feeds due to the coolant accelerator |
| Wide range of grades suitable for machining in all materials |
| Few inserts and support pad sizes cover the whole diameter range |
| 20 life cycle state |