WattStopper® PW-100-G Single Relay Wall Mount Occupancy Sensor, 120/230/277 VAC, Passive Infrared Sensor, 180 deg
Occupancy Sensors
1110329
MFG #: PW-100-G
WattStopper®
103.91000
/ ea
- Application: Small Office, Small Conference, Lunch/Break Rooms
- Body: Plastic Housing
- Catalog Number: PW-100-G
- Connector: Flying Leads
- Control Output: Automatic-On/Off, Manual-On/Off
- Country of Origin: CN
- Enclosure: Plastic Housing
- Environmental Conditions: 95% RH, non-condensing; for indoor use only
- Gross Weight Per Pack: 0.3000 lb
- Indicator: LED
- Load: 0-1200 W, 1/6 hp
- Mounting: Strap Mounting
- Operating Temperature: 35 °C
- Sensing Range: 525 sq ft
- Sensor: Passive Infrared
- Standard: UL244A, UL508
- Standards: RoHS CompliantcUL ListedUL 244AUL 508
- Supply Voltage: 120/230/277 VAC
- Target Size: 525 ft²
- Total Harmonic Distortion: Ballast Dependent
- Type: Commercial Wall Switch Sensor
- UNSPSC: 39122236
- UPC 11: 75418291927
- UPC 12: 75418291927
- Stock Status: NONSTOCK
- Brand: WattStopper®
- Manufacturer: Legrand
PIR technology senses occupancy by detecting the difference between heat emitted from the human body in motion and the background space. Relying on a clear line-of-sight view, passive infrared sensors make 100 percent coverage cut off possible. These sensors utilize a unique fresnel lens which divides the coverage area into zones, enhancing detection of small movement.
- http://www.wattstopper.com/(Seller Home Page URL)
- Install Instructions URL - ID-INS-v1-ws-install-pw100_07124r6.pdf(Install Instructions URL)
- Spec Sheet URL - ws-cutsheet-pw-100-passive-infrared-wall-switch_23305.pdf(Spec Sheet URL)
- Tech Drawing URL - pw-100.aspx#.UHx4lHq8HTo(Tech Drawing URL)
- Video - https://www.youtube.com/embed/qsVCQV9uGKM(Video)
- Warranty URL - 103448.pdf(Warranty URL)
- Applications
- Features
| Small Office, Small Conference, Lunch/Break Rooms |
| Passive Infrared |
| Time delay adjustments - 5 to 30 min at minimum, 3 minimum if no activity after 30 s at walk through mode, 5 s for 10 min with dip switch setting at test mode |
| High or low (DIP switch) PIR adjustment |
| 0 - 800 W tungsten or ballast, 1/6 hp motor load Limit for each relay at 120 VAC and 0 - 1200 W ballast load Limit for each relay at 277 VAC |
| Detection signature processing eliminates false triggers and provides immunity to RFI and EMI |
| Zero crossing for long relay life |
| Vandal-resistant lens combines precise coverage with durability |
| Choice of manual on or auto-ON operation |
| Selectable walk through mode turns lights off 3 min after the room is initially occupied if no motion is detected after the first 30 s |
| Test mode allows quick and easy adjustments |
| Selectable audible alert for impending shutoff |
| In automatic mode, sensor returns automatically to auto-ON after lights are turned OFF manually, ideal for presentations |
| Four occupancy logic options give users the ability to customize control to meet application needs |
| Optional light level sensing with simple setup |
| Service mode allows sensor to operate as a service switch in the unlikely event of a failure |
| Sensor coverage tested to NEMA guide Publication WD 7-2000 |
| Compatible with decorator wall plates |
| Magnetic or electronic ballast load type |
| One relay and one on/OFF button |
| Wall switch sensor turns lights off and on based on occupancy |