Hubbell® ASL-24L-3 Type III Medium Size Area Lighting, 24 LED Lamp, 181 W Fixture, 120/277 VAC, Dark Bronze Housing

Area Lighting
1060725 MFG #: ASL-24L-3
Hubbell Outdoor Lighting
636.79000 / ea
HOL_ASL_24L_PRODIMAGE_1200
  • Amperage Rating: 0.7 A
  • Application: Area/Site Applications
  • ARRA Compliant: Y
  • Average Life: 50000 hr
  • Buy American Compliant: Y
  • Catalog Number: ASL-24L-3
  • Color: Dark Bronze
  • Color Rendering Index [CRI]: 70
  • Color Temperature: 4000 K
  • Country of Origin: US
  • Currency: USD
  • Dimensions: 11.7 Dia x 22.4 in L
  • EU RoHS Indicator: C
  • Fixture Finish: powder coat paint
  • Fixture Material: aluminum
  • Frequency Rating: 50/60 Hz
  • Gross Weight Per Pack: 20.0300 lb
  • Gross Weight per Pack Metric: 9.09
  • Gross Weight UOM Metric: kg
  • Harmonization Tariff Schedule Code: 9405406000
  • Height: 7.09 in
  • Height [Metric]: 18.0086 cm
  • Housing Material: Die Cast Aluminum
  • Lamp Wattage: 235 W
  • Length: 30.12 in
  • Length [Metric]: 76.5048 cm
  • Lumens: 16364 Lumens
  • Mounting Type: Pole
  • Returnable: Y
  • Series: Viper Large
  • Standard: UL;CSA;Wet Listed;Damp Listed;ANSI 3G vibration rated
  • Standards: UL 1598CSA 22.2ANSI C136.31IDA ApprovedDLC Listed
  • Type: Outdoor Area and Site
  • UNSPSC: 39111612
  • UPC 11: 78598803161
  • UPC 12: 78598803161
  • Width: 14.17 in
  • Width [Metric]: 35.9918 cm
  • Stock Status: NONSTOCK
  • Brand: Hubbell Outdoor Lighting
  • Manufacturer: Hubbell
  • Housing Finish: Dark Bronze
  • Lamp Type: LED
  • Voltage Rating: 120/277 VAC
  • Number Of Lamps: 24
Hubbell® Area Lighting, Type III Medium Size, 120/277 VAC, 181 W Fixture, LED Lamp, 24 Lamps, 4000 K Color, 70 CRI CRI, Acrylic Glass Lens, 16364 Lumens, Dark Bronze Housing, 11.7 Dia x 22.4 in L
QTY
Add to Wishlist
  • Applications
  • Features
Area/Site Applications
Contributes to a 'Green' environment and provides substantial power savings
8 lighting distributions puts light where it is needed, not wasted
5 wattages from 135 to 280 W of LED efficiency
Coated with a polyester finish that meets ASTM B117 corrosion test requirements and ASTM D522 cracking and loss of adhesion test requirements
External hardware is corrosion resistant
One piece optical cartridge system consisting of an LED engine, LED lamps, optics, gasket and stainless steel bezel
Cartridge is held together with internal brass standoffs soldered to the board so that it can be field replaced as a one-piece optical system
Two-piece silicone and micro-cellular polyurethane foam gasket ensures a weather proof seal around each individual LED
Power factor is >= 0.9 at full load
Dimming drivers are standard, but must contact factory to request wiring leads for purpose of external dimming controls
Component-to-component wiring within the luminaire may carry no more than 80% of rated load
Plug disconnects are certified by UL for use at 600 VAC, 13 A or higher
Fixture electrical compartment shall contain all LED driver components and shall be provided with a push-button terminal block for AC power connections
-40 to 40 deg C ambient operating temperature
20 kA surge protection
Lifeshield circuit protects luminaire from excessive temperature, shall activate at a specific, factory-preset temperature and progressively reduce power over a finite temperature range
Operation shall be smooth and undetectable to the eye
Thermal circuit is designed to "fail on", allowing the luminaire to revert to full power in the event of an interruption of its power supply, or faulty wiring connection to the drivers
The device shall be able to co-exist with other 0-10V control devices
IFS polyester powder-coat electrostatically applied and thermo cured