Decora® ODS0D-IDT 1-Pole Dual Relay Wall Mount Occupancy Sensor, 120/230/277 VAC, Passive Infrared Sensor, 180 deg
Wall Mount Occupancy Sensors
834246
MFG #: ODS0D-IDT
Leviton®
108.02000
/ ea
- Application: Commercial
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: ODS0D-IDT
- Color: Light Almond
- Control Output: Manual On/Automatic Off
- Country of Origin: MX
- Currency: USD
- Dimensions: 46 in H x 1.75 in W x 1.83 in D
- Environmental Conditions: Operating Temperature (0 to +50 DEG C);Storage Temperature (-10 to +85 DEG C);Humidity (20% to 90% Non-Condensing)
- EU RoHS Indicator: C
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 0.3700 lb
- Gross Weight per Pack Metric: 0.17
- Height: 4.62 in
- Lamp Type: Fluorescent/Incandescent
- Length: 2.88 in
- Mounting: WALL
- Power Consumption: 110 @ 120V;277 @ 270V MILWTT
- Power Rating: 110/270 mW
- Response Frequency: 50/60 Hz
- Size: 46 H x 1.75 W x 1.83 D in
- Standard: cULus Listed;CEC Title 24 Compliant FCC Compliant
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantcULus ListedCEC Title 20/24 CompliantFCC Approved
- Sub Brand: Decora
- Supply Voltage: 120/230/277 VAC
- Temperature Rating: 0 to 50 °C
- Time Delay: 30 s to 30 min
- Type: Occupancy Sensor;Single-Pole Switch;Dual Relay
- UNSPSC: 45111808
- UPC 11: 07847727745
- UPC 12: 078477277454
- Width: 1.88
- Width [Metric]: 4.7625
- Stock Status: NONSTOCK
- Brand: Leviton®
- Manufacturer: Leviton Manufacturing Co., Inc.
- Coverage: 2100 ft²
- Mounting Type: Wall
- Sensor Type: PIR
- Viewing Angle: 180 °
- Voltage Rating: 120/230/277 VAC
The ODS0D uses passive infrared (PIR) technology to monitor a room for occupancy through a segmented fresnel lens. This specialized lens divides the field of view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches two separate lighting loads ON. The lights will remain ON as long as there is an occupant moving through the sensor zones. The ODS0D-TD has an adjustable 30 minute time delay setting for the first and second relay to comply with CEC Title 24. The second relay is manual-on only.
- http://www.leviton.com(Seller Home Page URL)
- Install Instructions URL - Decora_ODS0D_IAW_Installation_Sheet.pdf(Install Instructions URL)
- Safety Data Sheet URL - MSDS.pdf(Safety Data Sheet URL)
- Spec Sheet 1 URL - Decora_ODS0D_IAW_Datasheet_1.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - 10962_MIVUO6GTPSJ0N9KE.pdf(Spec Sheet URL)
- Spec Sheet URL - ODS0D-IDT.pdf?products=ODS0D-IDT&locale=en(Spec Sheet URL)
- Tech Bulletin URL - Leviton_ODC0P_W_Technical_Bulletin.pdf(Tech Bulletin URL)
- Video - https://www.youtube.com/embed/jK48BrNhHBw&rel=0(Video)
- Applications
- Features
Commercial |
Provides Automatic Switching for Two Separate Banks of Fluorescent, Incandescent or Low-Voltage Lighting From a Single Unit, Convenient Dual Pushbuttons Provide Manual-ON/OFF Light Switching of Each Load at any Time, ODSOD-ID Conference Room Mode-Primary |
Neutral wire not required |
Grounding wire required |
External power pack not required |
Commercial grade and internal photocell |
Ambient light Override |
1200 VA at 120 VAC, 2700 VA at 277 VAC primary relay fluorescent, 800 W at 120 VAC primary relay incandescent and 800 VA at 120 VAC, 1200 VA at 277 VAC secondary relay fluorescent, 800 W at 120 VAC secondary relay incandescent load ratings |
-10 to 85 deg C storage temperature range |
20% to 90% non-condensing relative humidity |
For indoor use only |
Provides automatic switching for two separate banks of fluorescent, incandescent, or low voltage lighting from a single unit |
Convenient dual pushbuttons provide manual-on/off light switching of each load at any time |
Auto adapting delayed-off time interval compensates for real-time occupancy patterns, preventing unnecessary ON/off switching |
Exclusive walk-through feature provides increased energy savings by not leaving the lights-on for an extended period after only momentary occupancy |
Low-profile design eliminates obtrusive "scanning-device" look |
180 deg field-of-view provides approximately 2100 square feet of coverage, suitable for a variety of commercial areas |
Self-adaptive technology |
Time delay adjustment for delayed-off time settings of 30 seconds, 5, 10, and 30 minutes. allows customized adjustments to maximize energy savings |
Vandal resistant PIR lens |
False detection circuitry |
Primary relay switches at the zero crossing point of the AC power curve to ensure longer contact life and compatibility with electronic ballasts |