RadioRA® RRD-8S-DV-WH 2 Maestro® RRD-8S-DV Local Control Electronic Switch, 120 to 277 VAC, 8 A, 1 Pole, On/Off, White
Lighting Control Switches
639964
MFG #: RRD-8S-DV-WH
Lutron®
199.00000
/ ea
- Actuator: Tapswitch
- Catalog Number: RRD-8S-DV-WH
- Connection: Screw Terminal
- Contact Configuration: N-O
- Contact Rating: 8/3 A
- Control: Tap
- Country of Origin: MX
- Dimensions: 4-11/16 in H x 2-15/16 in W x 5/16 in D
- Enclosure: Plastic
- Environmental Conditions: 0 to 90% humidity, non-condensing. Indoor use only.
- Finish: Gloss
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 0.3000 lb
- Insulation: Plastic
- Material: Metal/Plastic
- Model: Wireless electronic switch, multi-location/single-pole
- Mounting: Wallbox
- Mounting Type: Wall
- Operating Temperature: 32 to 104 °F
- Power Rating: 0.2 W
- Series: RRD-8S
- Size: 4.69 x 2.94 in
- Standard: UL, CSA, NOM, FCC, IC, COFETEL, ANATEL
- Standards: UL ListedCSA CertifiedANATEL CertifiedCOFETEL CertifiedFCC ApprovedIC CertifiedNOM CertifiedIEC 61000-4-2IEEE C62.41
- Sub Brand: RadioRA 2
- Temperature Rating: 32 to 104 °F
- Terminal Type: Screw
- Type: Wireless electronic switch, multi-location/single-pole
- UNSPSC: 39122216
- UPC 11: 02755786926
- UPC 12: 027557869263
- Wattage: 2216/831 W
- Stock Status: NONSTOCK
- Brand: Lutron®
- Manufacturer: Lutron Electronics Co., Inc
- Amperage Rating: 8/3 A
- Color: White
- Operation Mode: ON/OFF
- Voltage Rating: 120 to 277 V
- Number Of Poles: 1
RadioRA® 2® 2 Maestro® local controls include a front accessible service switch (FASSTM) for safe lamp replacement. RadioRA® 2® 2 Maestro® local controls install in single-pole or multi-location applications. Remote dimmers/switches are available for multi-location control.
- Features
| Two-wire electronic lighting and motor load switch, functions much like standard dimmers and switches, but can be controlled as part of a lighting control system, 1/10 HP |
| On a single tap, lights or motors turn ON or OFF |
| 0 to 90% humidity |
| Non-condensing |
| ESD protection tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2 |
| Two wire switch |
| 1/10 hp 3 A motor |