Lithonia Lighting® LC6-R6 LC6 Downlight Housing, Incandescent Lamp, IC/Non-IC Insulation, 120 VAC, 7-1/8 in Ceiling Opening
Recessed Lighting Housings
1337849
MFG #: LC6-R6
Lithonia Lighting®
0.00000
/ ea
- Catalog Number: LC6-R6
- Country of Origin: MX
- Depth: 13 in
- Diameter: 6 in
- Gross Weight Per Pack: 0.4200 lb
- Height: 8-1/4 in
- Mounting Type: Recessed/Wood Joist/T-Bar
- Number Of Lamps: 1
- Series: LC6
- Standards: UL Listed
- Suitable For Use With: REALITY™ ENERGY STAR® (ESL) Open Narrow Flange LED Module/P Series Open and Baffle Wide Flange LED Modules
- Type: Round
- UNSPSC: 39111515
- UPC 11: 78423105114
- Width: 22-3/4 in
- Stock Status: NONSTOCK
- Brand: Lithonia Lighting®
- Manufacturer: Acuity Brands
- Ceiling Opening: 7-1/8 in
- Housing Material: Thermoplastic
- Lamp Type: Incandescent
- Voltage Rating: 120 VAC
Recessed incandescent housing for 2x8 new construction rated IC and Non-IC. Approved for direct burial in insulation. Not for pulling wires. Air-tight, aluminum housing with engineering-grade thermoplastic frame and junction box with four built-in ROMEX® clamps and ground wire. Pre-assembled poke-home connectors for ease of wiring. Rated for 90 dig C. Factory-installed captive bar hangers that span up to 24 o.c. and feature stepped shank nail with integral T-bar locks. Two locking screws hold fixture position. Socket clips to trim to ensure proper and consistent lamp position.
- Features
| 100 CRI, 3000K and 1100 lumens direct (95 to 100% down) light distribution |
| Airtight standard and tested to meet current energy codes |
| Aluminum housing with engineering grade thermoplastic frame |
| Galvanized bar hangers span up to 24 in OC and feature stepped shank nail and positioning guide with integral T-bar locks |
| Engineering-grade thermoplastic junction box (4) built-in Romex® clamps |
| Pre-assembled poke home connectors for ease of wiring |
| Expandable bar hangers allow for off center mounting in wood joist or T-bar ceilings |