TPI P3P2610CA1 2600 3-Phase Downflow Standard Electric Unit Heater, 34130 Btu, 480 VAC, 12.04 A, 10 kW
Electric Unit Heaters
905998
MFG #: P3P2610CA1
TPI
2303.90000
/ ea
- Amperage Rating: 12.04 A
- Application: Indoor-Commercial/Industrial-Downflow/High Bay Areas
- ARRA Compliant: Y
- Buy American Compliant: Y
- Catalog Number: P3P2610CA1
- Color: Gray
- Country of Origin: US
- Currency: USD
- Dimensions: 20-1/2 in W x 20-1/2 in D x 15 in H
- EU RoHS Indicator: N
- Finish: Epoxy Powder Coated
- Flow Rate: 1200 cfm
- Gross Weight Per Pack: 75.0000 lb
- Gross Weight per Pack Metric: 34.02
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8516.29
- Height: 22.00 in
- Height [Metric]: 55.8800 cm
- Housing Material: Steel
- Length: 27.00 in
- Length [Metric]: 68.5800 cm
- Material: Steel
- Model: P3P2610CA1
- Mounting: Bracket
- Mounting Height: 6 ft
- Mounting Type: Panel/Downflow
- Phase: 3
- Returnable: N
- Series: 2600
- Speed: 1570 rpm
- Standard: ETLus Listed;OSHA
- Temperature Rating: 26 °F
- Type: 3-Phase Standard
- UNSPSC: 40101809
- UPC 11: 68633471594
- UPC 12: 686334715942
- Wattage: 10k W
- Width: 25.00 in
- Width [Metric]: 63.5000 cm
- Stock Status: NONSTOCK
- Brand: TPI
- Manufacturer: TPI
- Power Rating: 10 kW
- Voltage Rating: 480 VAC
TPI Electric Unit Heater, 3-Phase Downflow Standard, Series: 2600, 34130 Btu, 480 VAC, 12.04 A, 10 kW, 1200 cfm, 1570 rpm, Panel Mount, 6 ft Mounting Height, Steel, Gray, 15 in H x 20-1/2 in W x 20-1/2 in D
- Applications
- Features
| Indoor-Commercial/Industrial-Downflow/High Bay Areas |
| Features: Corrosion-Resistant;Overheat Protection;Manual Reset Limit Control;Fan Purge Circuit;Manufactured in U.S.A.; Btu Rating: 34130; Amperage Rating: 124 AMP; Finish: Epoxy Powder Coated; Air Flow: 1200 CFM; Series: 2600; Control Voltage: 24 V |
| 16 ga steel cabinet with epoxy powder coated finish and control compartment with a hinged and latched access door |
| Corrosion resistant element with steel sheath and steel spiral fins |
| All units come equipped with manual reset limit controls to de-energize the heater should an over temperature situation occur |
| Totally enclosed, 1-Speed, 1-phase permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models |
| 1570 rpm max axial flow fan blade |
| All models equipped with fan purge which allows fan to operate after elements are de-energized to purge residual heat |
| Equipped with in-built disconnect switch |
| Unit can be mounted using optional mounting bracket or field constructed angle iron bracket |
| Not recommended for mounting with threaded rod or chain |
| Elements shall consist of nickel-chromium alloy resistance wire embedded and completely surrounded in magnesium oxide, enclosed and swaged into corrosion resistant sheath |
| Heaters shall be designed for a single supply circuit with elements, motor and control circuits subdivided and fused to conform with the latest National electric Code and OSHA requirements |
| All 3-phase heaters shall have balanced phases |
| Overheat protection |
| 24 V control voltage |
| Overheat protection |