Banner Engineering QS18UPAQ8 QS18U Compact High Speed Ultrasonic Proximity Sensor, 12 to 30 VDC, Time of Flight Sensing
Ultrasonic Proximity Sensors
270911
MFG #: QS18UPAQ8
BANNER®
149.91000
/ ea
- Amperage Rating: 25 mA
- Catalog Number: QS18UPAQ8
- Connection Type: Integral Quick Disconnect
- Country of Origin: UKN
- Enclosure Type: NEMA 6P/IP67
- Environmental Conditions: 100% Non-Condensing Relative Humidity, IEC 60947-5-2 Requirements 30 11 ms Duration Half Sine Wave Mechanical Shock
- Frequency Response: 300 kHz
- Gross Weight Per Pack: 1 lb
- Light Source: LED
- Material: ABS
- Response Time: 15 ms
- Sensing Distance: 50 to 500 mm
- Series: QS18U
- Temperature Rating: -20 to 60 °C
- Type: Compact High Speed
- UNSPSC: 41111960
- UPC 11: 66248873156
- UPC 12: 66248873156
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: PNP
- Sensing Method: Time of Flight
- Voltage Rating: 12 to 30 VDC
Banner Engineering Ultrasonic Proximity Sensor, Compact High Speed, Series: QS18U, Time of Flight Sensing Method, 50 to 500 mm Sensing Distance, LED Light Source, PNP Output, 12 to 30 VDC, 25 mA, 300 kHz, Integral Quick Disconnect, 15 ms Response, NEMA 6P/IP67, -20 to 60 deg C, ABS, Environmental Conditions: 100% Non-Condensing Relative Humidity, IEC 60947-5-2 Requirements 30 11 ms Duration Half Sine Wave Mechanical Shock
- bannerengineering.com(Seller Home Page URL)
- Compliance Cert URL - Banner_QS186E_Compliance_Certificate.pdf(Compliance Cert URL)
- Spec Sheet URL - SPE_66248873156_Spec.pdf(Spec Sheet URL)
- Tech Drawing URL - DRW_66248873156_Tech.pdf(Tech Drawing URL)
- Warranty URL - WAR_Banner_Warranty.pdf(Warranty URL)
- Features
| Fast, easy-to-use Teach-mode programming; no potentiometer adjustments; Ultra-compact housing; Two bi-colored status LEDs; Rugged encapsulated version for harsh environments; Temperature compensation; Configurable for normally open or normally closed operation; Fast response time; Protected against reverse polarity and transient voltages; SPST solid-state switch conducts when target is sensed within sensing window; Protected against short-circuit conditions; All models meet MIL Standard 202F requirements method 201A; Also meets IEC 947-5-2 requirements: 30G 11 MS duration, half sine wave; NPN off-state leakage current is less than 200 MICAMP for load resistances less than 3 KOHM or optically isolated loads, for load current of 100 MILAMP, leakage is Less Than 1 PCT of load current; Objects passing inside the specified near limit may produce a false response |