Banner Engineering Q45ULIU64ACRQ6 Q45U Versatile Ultrasonic Proximity Sensor, 15 to 24 VDC, Time of Flight Sensing
Ultrasonic Proximity Sensors
60018
MFG #: Q45ULIU64ACRQ6
BANNER®
629.61000
/ ea
- Amperage Rating: 100 mA
- Catalog Number: Q45ULIU64ACRQ6
- Connection Type: Integral Quick Disconnect
- Country of Origin: UA
- Enclosure Type: NEMA 6P/IP67
- Environmental Conditions: 100% Non-Condensing Relative Humidity, IEC 60947-5-2 Requirements 30 11 ms Duration Half Sine Wave Mechanical Shock
- Frequency Response: 230 kHz
- Gross Weight Per Pack: 1 lb
- Light Source: LED
- Material: Polybutylene Terephthalate
- Response Time: 40 ms
- Sensing Distance: 100 to 1400 mm
- Series: Q45U
- Standards: CE Marked, CSA Approval
- Temperature Rating: -25 to 70 °C
- Type: Versatile
- UNSPSC: 41111960
- UPC 11: 66248847554
- UPC 12: 66248847554
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Sensing Method: Time of Flight
- Voltage Rating: 15 to 24 VDC
Banner Engineering Ultrasonic Proximity Sensor, Versatile, Series: Q45U, Time of Flight Sensing Method, 100 to 1400 mm Sensing Distance, LED Light Source, 15 to 24 VDC, 100 mA, 230 kHz, Integral Quick Disconnect, 40 ms Response, NEMA 6P/IP67, -25 to 70 deg C, Polybutylene Terephthalate, Environmental Conditions: 100% Non-Condensing Relative Humidity, IEC 60947-5-2 Requirements 30 11 ms Duration Half Sine Wave Mechanical Shock
- Compliance Cert URL - Banner_Q45ULIU64BCRQ_Compliance_Certificate.pdf(Compliance Cert URL)
- Spec Sheet URL - Banner_Q45ULIU64ACRQ_Specification_Sheet.pdf(Spec Sheet URL)
- Tech Drawing URL - IDW_DOCUMENT_1480877636084.pdf(Tech Drawing URL)
- Warranty URL - Banner_Q45UBB63DAQ6_Technical_Drawing.pdf(Warranty URL)
- Features
| Push-button Teach-mode programming of sensing window limits; Digital filtering for exceptional immunity to electrical and acoustic noise; All models include temperature compensation; Rugged design for use in demanding sensing environments; Input for remote Teach-mode programming of window limits; Protected against reverse polarity and transient voltages; All models meet MIL Standard 202F requirements, method 201A, 213B conditions H and I, also meets IEC 947-5-2, requirements 30G, 11 MS duration, half sine wave; One voltage sourcing and one current sourcing; One or the other output is enabled by internal programming switch; Output function may be programmed by a 4-position DIP switch located on top of the sensor, beneath the transparent o-ring sealed acrylic cover; Both outputs are protected against continuous overload and short circuit; Minimum target size: 10 x |
| Rectangular housing style |
| M12 euro style quick disconnect cable connection requires mating cordset |
| 5-pins |
| Protected against short circuit conditions output protection |
| 15 min warm-up time |
| 10 mm window size |
| Supply protection circuitry protects against reverse polarity and transient over voltage |
| Analog input/output |
| Teach button, dip switches adjustments |
| 0.05% of sensing distance/deg C temperature effect |
| 0 to 10 VDC/4 to 20 mA analog output configuration |
| 10 mA analog voltage output rating |
| 1% of full scale analog linearity |
| 1 to 500 Ohm impedance analog current output rating |