Banner Engineering EZ-SCREEN® SLPP14-270P88 Low Profile Safety Light Screen, 270 mm H Protected, 27 Beams, 270 mm OAH
Safety Light Curtains
593929
MFG #: SLPP14-270P88
BANNER®
1674.30000
/ ea
- Aperture Angle: +/-2.5 °
- Cable Length: 300 ° C
- Catalog Number: SLPP14-270P88
- Connection Type: Pigtail Quick-Disconnect
- Country of Origin: UA
- Enclosure Type: IP65
- Finish: Polyester Powder Coated
- Gross Weight Per Pack: 1 lb
- Housing Material: Aluminum
- Light Source: Infrared LED
- Mounting Type: Panel
- Output Current: 60/150 mA
- Power Supply: 60 mA
- Reset Type: High/Low Signal
- Response Time: 10.5 ms
- Standards: ANSI Standard, CE Marked, cTUVus, OSHA Certified
- Storage|Operating Temperature: 0 to 55 °C
- Supply Voltage: 24 VDC
- Type: Low Profile
- UNSPSC: 32151804
- UPC 11: 66248883724
- UPC 12: 66248883724
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Number of Beams: 27
- Operating Range: 0.1 to 7 m
- Overall Height: 270 mm
- Protected Height: 270 mm
Banner Engineering EZ-SCREEN® Safety Light Screen, Low Profile, 270 mm Protected Height, 0.1 to 7 m Operating, 27 Beam, 270 mm Overall Height, 10.5 ms Response, +/-2.5 deg Aperture Angle, Infrared LED Light Source, 24 VDC Supply Voltage, 60 mA Supply, 60/150 mA Output, High/Low Signal Reset, Aluminum Housing, Polyester Powder Coated, IP65, Pigtail Quick-Disconnect, 300 mm Cable Length, 0 to 55 deg C, Bracket Mount
- Features
| The low-profile safety light screen provides a small, compact design with end-to-end sensing; Features seven-segment display for diagnostic information and number of blocked beams; Offers reduced resolution and fixed blanking to ignore tooling or constant inflow of materials; Identifies clear and blocked beams using zone indicators; IP65 extruded aluminum housing with yellow polyester powder finish standard (optional clear anodized aluminum or nickel-plated silver finish) and well-sealed, rugged die-cast zinc end caps, acrylic lens cover, copolyester access cover; Remote test input- high signal: 10 - 30 VDC, low signal: 0 - 3 VDC, input current: 35 MILAMP inrush, 10 MILAMP maximum; Reset input- high signal: 10 - 30 VDC At 30 MILAMP typical, low signal: 0 - 3 VDC, closed switch time: 0.25 - 2 S; EDM input- high signal: 10 - 30 VDC at 30 MILAMP typical, low signal: |
| The low-profile safety light screen provides a small, compact design with end-to-end sensing |
| Features seven-segment display for diagnostic information and number of blocked beams |
| Offers reduced resolution and fixed blanking to ignore tooling or constant inflow of materials |
| Identifies clear and blocked beams using zone indicators |
| IP65 extruded aluminum housing with yellow polyester powder finish standard (optional clear anodized aluminum or nickel-plated silver finish) and well-sealed, rugged die-cast zinc end caps, acrylic lens cover, copolyester access cover |
| Remote test input- high signal 10 - 30 VDC, low signal 0 - 3 VDC, input current 35 mA inrush, 10 mA maximum |
| Reset input- high signal 10 - 30 VDC At 30 mA typical, low signal 0 - 3 VDC, closed switch time 0.25 - 2 S |
| EDM input- high signal 10 - 30 VDC at 30 mA typical, low signal 0 - 3 VDC |
| All inputs and outputs are protected from short circuits to 24 VDC or DC common |
| Electrical safety class III |
| EZ-Screen LP components have passed vibration and shock tests according to IEC 61496-1 |
| This includes vibration (10 cycles) of 10 - 55 HZ at 0.35 MM single amplitude (0.70 MM peak-to-peak) and shock of 10 G for 16 MS (6000 cycles) |
| 10 - 30 VDC at 30 mA typical reset input high signal, 0 - 3 VDC low signal |
| PNP (trip/latch) safety output rating |
| 60 mA maximum emitter power supply |
| (2) 690 MM Swivel End Brackets And Side Brackets mounting |
| M12 pigtail quick disconnect |
| 14 mm resolution |
| 850 NMTR infrared LED light source |
| Plus/minus 2.5 deg at 3 m. Yellow polyester powder |