FRZ FEBN-81-81 NEUTRAL FH INLINE 1P 81-81

In-Line Fuse Holders & Insulators
PDW~860159 MFG #: FEBN-81-81
Ferraz Shawmut
273.63000 / ea
11450_SPXQG3UC0TL824BI
  • Alternate Catalog Number: FEBN-81-81
  • Application: Street lighting Parking lot lighting Traffic signaling Sports lighting Boats and marinas Humid/corrosive environments
  • ARRA Compliant: X
  • Buy American Compliant: X
  • Catalog Number: FEBN-81-81
  • Class: M
  • Connection: Single Set Screw
  • Connection Type: Single Set Screw
  • Country of Origin: MX
  • Currency: USD
  • Dimensions: 8 in L
  • EU RoHS Indicator: Y
  • Fuse Diameter: 13/32 in
  • Fuse Length: 1-1/2 in
  • Gross Volume Per Pack: 4.30
  • Gross Weight Per Pack: 0.1000 lb
  • Gross Weight per Pack Metric: 0.04
  • Gross Weight UOM Metric: kg
  • Harmonization Tariff Schedule Code: 8536908585
  • Height: 1.00 in
  • Height [Metric]: 25.4000 mm
  • Length: 4.30 in
  • Length [Metric]: 109.2200 cm
  • Material: Polyethylene
  • Mounting: In-Line
  • Mounting Type: In-Line
  • Number Of Phases: 1
  • Phase: 1
  • Series: FEBN
  • Size: 4.3 x 1 x 1 in
  • Standard: UL Recognized Component to standard 4248-1, File E52283 CSA Certified C22.2, Class 6225, File 32169
  • Standards: RoHS CompliantUL ListedUL RecognizedUL 4248-4 IZLT2 File No. E52283CSA CertifiedCSA C22.2 Class 6225 File No. 32169
  • Suitable For Use With: ATQ, ATM, TRM, OTM, GGU, GFN, A13X-2, A25Z-2, A60Q-2, A6Y-2B Series Midget Fuse
  • Temperature Rating: 155 °C
  • Type: In-line Fuse Holders
  • UNSPSC: 39121624
  • UPC 11: 78200130108
  • UPC 12: 782001301088
  • Width: 1.00 in
  • Width [Metric]: 25.4000 mm
  • Stock Status: NONSTOCK
  • Brand: Ferraz Shawmut
  • Manufacturer: Ferraz Shawmut
  • Amperage Rating: 30 A
  • Voltage Rating: 600 VAC
  • Wire Size: 12 to 2 AWG
  • Number Of Poles: 1
Mersen's complete line of single and dual pole in-line fuseholders with integral neutral link. The fuseholders are designed for quick installation. Securing nuts or screws are captive thus speeding installation by reducing the need to locate and assemble loose components in the field. Three internal O-rings per pole seal the fuseholder providing a water-resistant compartment for the fuse. The captive O-rings are colored (blue for single pole and red for dual pole) for quick detection. Optional cone shaped insulator boots can be slipped on to provide a watertight seal (breakaway versions come with boots standard). Both single and dual pole versions have an optional breakaway feature which safely disconnects the load in case of a pole knockdown. Fuses remain safely encapsulated within the watertight fuse holder on the load side. Once the pole has been reinstalled the fuseholder can be easily reconnected. 600 Volts 30 Amps 1 pole 81-81 series.
QTY
Add to Wishlist
  • Applications
  • Features
Street lighting Parking lot lighting Traffic signaling Sports lighting Boats and marinas Humid/corrosive environments
Breakaway version quickly disconnects line side during pole knockdown in compliance with state and federal highway commission standards 3 O-rings per pole for watertight applications Colored O-rings for quick detection Single and dual poles Accepts midget or class CC fuses Wide assortment of terminal variations High heat, impact resistant insulator Captive nut or screw for quick installations Polarized dual pole provides simultaneous disconnection Permanently installed neutral versions quickly identified by white nuts Environmentally friendly no-lead solder used Highly visible catalog number even with insulation boots installed Wire gauge size identified on insulation boots for quick, accurate trimming
Breakaway version quickly disconnects line side during pole knockdown in compliance with state and federal highway commission standards
(3) O-rings per pole for watertight applications
Colored O-rings for quick detection
Accepts midget or class CC fuses
Wide assortment of terminal variations
High heat, impact resistant insulator
Captive nut or screw for quick installations
Polarized dual pole provides simultaneous disconnection
Tulip fuse clip for improved contact and low losses
Permanently installed neutral versions quickly identified by white nuts
Environmentally friendly no-lead solder used
Highly visible catalog number even with insulation boots installed
Wire gauge size identified on insulation boots for quick, accurate trimming
(1) 12 to 2 AWG solid/stranded single set screw copper terminal type 81 wire size
Without insulated boot
FEBN versions have a permanently mounted dummy fuse for neutral applications