Hubbell Wiring Device-Kellems DRUB15 DIN-R UTL BOX, 15A 125V
Utility - Handy Box
59385
MFG #: DRUB15
Hubbell Wiring Device-Kellems
61.03000
/ ea
- Application: Unit Pre-Wired with Duplex Receptacle
- ARRA Compliant: C
- Buy American Compliant: C
- Cable Entry: Terminals
- Catalog Number: DRUB15
- Color: Gray
- Construction: Molded and Fabricated
- Country of Origin: CN
- Cubic Capacity: 34.00 Cubic Inches in3
- Currency: USD
- Dimensions: 5.62 in L x 3.31 in W x 2.54 in H
- Enclosure Type: NEMA 5-15R
- EU RoHS Indicator: Y
- Gross Weight Per Pack: 1.0000 lb
- Gross Weight per Pack Metric: 0.31
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8537109170
- Height: 4.00 in
- Height [Metric]: 10.1600 cm
- Length: 5.20 in
- Length [Metric]: 13.2080 cm
- Mounting: Vertical Mount, DIN Rail Mount
- Mounting Type: DIN Rail/Surface
- NEMA Rating: 5-15R
- Returnable: Y
- Size: 5.62 in x 3.31 in x 2.54 in
- Standard: UL Listed, Certified to CSA
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantUL 498/514cULus ListedCSA Certified
- Sub Brand: DIN Rail Utility Box
- Type: Box and Device
- UNSPSC: 39121303
- UPC 11: 78358510800
- UPC 12: 783585108001
- Width: 5.40 in
- Width [Metric]: 13.7160 cm
- Stock Status: NONSTOCK
- Brand: Hubbell Wiring Device-Kellems
- Manufacturer: Hubbell
- Capacity: 34 in³
- Material: COMPOSITE
- Number of Outlets: 1
Hubbell's DIN Rail utility Box offers a labor saving way to provide utility power to any control cabinet. Installing the DIN Rail utility Box is as easy as snapping the box onto a 35mm DIN Rail and connecting the line, neutral and ground wires to the terminal block. Utility power for fans, lights, laptop computers, testers or any other need is now at your disposal. If load limiting is a concern, Hubbell's "CB" version comes with a 5 Amp circuit breaker that provides over-current protection to make sure large loads are not drawn from the DIN Rail utility Box. All Hubbell DIN Rail utility boxes may be mounted either vertically or horizontally on the DIN Rail; the "H" version comes with the terminal block mounted for easy wiring when the DIN Rail utility Box is mounted horizontally.
- http://www.hubbell-wiring.com/(Seller Home Page URL)
- Install Instructions 1 URL - 11456_L0UQZNES34KCAHWX.pdf(Install Instructions 1 URL)
- Install Instructions URL - IDW_DOCUMENT_1487175591543.pdf(Install Instructions URL)
- Line Drawing URL - 11456_FSZDLJCRX8IO5PNB.pdf(Line Drawing URL)
- Spec Sheet 1 URL - Wiring_Device_Kellems_DRUB15_Datasheet_1.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - 11456_5UK06FMNO4AJRQ7V.pdf(Spec Sheet URL)
- Tech Drawing URL - WIRING_DRUB15_M8540_ACAD_DRAWING.dwg(Tech Drawing URL)
- Warranty URL - 11456_Y8PS6T0FNOGH3Q75.pdf(Warranty URL)
- Warranty URL - Wiring_WDK_Warranty.pdf(Warranty URL)
- Applications
- Features
| Unit Pre-Wired with Duplex Receptacle |
| 15A 125V, 2-Pole 3-Wire Grounding |
| 15 A at 125 V, 0.5 hp power rating, 2-pole, 3-wire grounding |
| Withstands 2000 V minimum dielectric voltage |
| Certified for current interrupting at full rated current |
| Max 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75% |
| NO 14 to 12 AWG copper stranded or solid conductor only |
| All gray housing, faceplate, and receptacle that blend well in control cabinet applications |
| Dual snap design allows all Hubbell DIN Rail utility boxes to be mounted vertically or horizontally |
| The "H" version comes with the terminal block positioned for easy wiring in the horizontal position |
| Terminal blocks feature a set screw design for easy wiring |
| Removable inserts allow for the relocation of the terminal block on any of the DIN Rail utility boxes |
| Inserts are located on all four sides of the box |