Wiremold® Plugmold® S20GB306 2000 1-Channel Multi-Outlet Power Strip, 125 VAC, 15 A, 6 Outlets, Threaded Mount
Prewired Raceways
556076
MFG #: S20GB306
Wiremold®
91.28000
/ ea
- ARRA Compliant: Y
- Back Type: Screw-On
- Buy American Compliant: Y
- Catalog Number: S20GB306
- Country of Origin: US
- Currency: USD
- Environmental Conditions: Dry interior locations
- EU RoHS Indicator: Y
- Gross Volume Per Pack: 101.22
- Gross Volume per Pack Metric: 1658.65
- Gross Volume UOM: CI
- Gross Volume UOM Metric: cm3
- Gross Weight Per Pack: 1.9500 lb
- Gross Weight per Pack Metric: 0.88
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8536698000
- Height [Metric]: 47.9425 cm
- Length [Metric]: 6.9850 cm
- Material Composition: http://www.ideadigitalcontent.com/files/11311/ROH_Legrand_ROHS_statement.pdf
- Material Composition Declaration: http://www.ideadigitalcontent.com/files/11311/ROH_Legrand_ROHS_statement.pdf
- Mounting Type: Threaded
- Number of Outlets: 6
- Outlet Type: NEMA 5-15R
- Series: 2000
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantcULus E4376 Guide RJBT E15191 Guide PVGTE41751 Guide RJPR NEC Article 386CEC Section 12-3032NEC Article 380Meets Section 12-3032 of CEC
- Type: 1-Circuit
- UNSPSC: 39121031
- UPC 11: 78677608487
- UPC 12: 78677608487
- Voltage Rating: 125 VAC
- Width [Metric]: 4.9530 cm
- Stock Status: NONSTOCK
- Brand: Wiremold®
- Manufacturer: Legrand
- Height: 18.88 in
- Length: 2.75 in
- Material: Steel
- Number of Channels: 1
- Width: 1.95 in
Plugmold sections come with single or alternating circuits, standard or isolated ground receptacles, and Snapicoil harnesses of prewired receptacles or cord ended units. Steel Plugmold comes in an ivory ScuffCoat or gray enamel finish. The ScuffCoat finish is scratch resistant and protects against nicks and chips while preventing color from fading.
- http://www.wiremold.com(Seller Home Page URL)
- Install Instructions 1 URL - 533534A6523D48FCA163BB2881EE0C61.pdf(Install Instructions 1 URL)
- Spec Sheet URL - 11311_7Z3Y69RFHXM4DJNS.png(Spec Sheet URL)
- Spec Sheet 1 URL - 5F5081E19C7E4C6DA9B64C3D10343144.pdf(Spec Sheet 1 URL)
- Material Composition - ROH_Legrand_ROHS_statement.pdf(Material Composition)
- ROHS Compliance URL(ROHS Compliance URL)
- Warranty URL - 14054_8VF03WQHGNZ7BJ91.pdf(Warranty URL)
- Spec Sheet URL - 5F5081E19C7E4C6DA9B64C3D10343144.pdf(Spec Sheet URL)
- Features
| Steel Raceway, Compact low profile design, Full range of fittings, one and two - gang device boxes. |
| Steel raceway provides superior strength for any dry location installation |
| Compact, low profile appearance requires minimal space |
| The durable ivory ScuffCoat™ provides a durable, scratch resistant finish |
| Full range of fittings provides a complete wiring solution |
| Single-and-dual-gang boxes wire devices into the raceway system or protect a Plugmold® strip with a surge or GFCI device |
| Ideal for short runs requiring additional outlets in electrically busy areas |
| Single, alternating circuit and isolated ground receptacles meets virtually any job requirement |
| Snapicoil harnesses of pre-wired receptacles in 48 and 50 ft, eliminates multiple splicing, speeding up installation on long runs |
| Snapicoil harnesses offer a choice of receptacle spacing |
| Dry interior locations |
| GB wiring configuration |
| 6 in outlet center distance |
| 3-wire, #12 THHN (1-hot, 1-neutral and 1-ground), 1 circuit has insulated grounding conductor |