Appleton® EYDM-150AL EYDM Male/Female Hub Conduit Drain Sealing Fitting, 1-1/2 in, For Use With IMC/Threaded Rigid Metal Conduit
Explosion Proof Conduit Sealing Fittings
941056
MFG #: EYDM150AL
Appleton™
186.99000
/ ea
- Application: For Use With Threaded Rigid Metal Conduit And IMC
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: EYDM150AL
- Connection: Tapered MNPT X Tapered FNPT
- Country of Origin: MX
- Currency: USD
- EU RoHS Indicator: C
- Gross Weight Per Pack: 0.0001 lb
- Gross Weight per Pack Metric: 0.57
- Gross Weight UOM Metric: kg
- Height: 3.50 in
- Height [Metric]: 8.8900 cm
- Length: 6.50 in
- Length [Metric]: 16.5100 cm
- Standard: UL 886 (1203), UL File Number E10444, CSA C22.2 No. 30, CSA 065181, UL Listed For Class I, Groups B, C, D; Class II, Groups E, F, G; And Class III
- Sub Brand: UNILETS
- Type: EYDM Series 25 PCT Fill Vertical Conduit Drain Sealing Fitting With Removable Nipple
- UNSPSC: 39121311
- UPC 11: 78138161987
- UPC 12: 781381619875
- Width: 5.00 in
- Width [Metric]: 12.7000 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Finish: Epoxy Powder Coated
- Material: Almag 35 Aluminum
- Size: 1-1/2 in
Appleton® EYDM 25% fill vertical conduit drain sealing fittings prevent the passage of gases, vapors or flames from one portion of a conduit system to another. They also restrict large amounts of ignitable gases or vapors from accumulating to confine explosive pressure. Appleton sealing fittings are explosionproof, dust-ignitionproof and raintight. They are suitable for use in class I and II locations.
- http://www.appletonelec.com(Seller Home Page URL)
- https://www.appleton.emerson.com/(Seller Home Page URL)
- Spec Sheet URL(Spec Sheet URL)
- Warranty URL - 11043_AFRVNTEYP0B9JHS4.pdf(Warranty URL)
- Warranty 1 URL - WAR_EGS_Terms_Conditions_Brand_Policies.pdf(Warranty 1 URL)
- Seller Home Page URL - appleton(Seller Home Page URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Applications
- Features
| For Use With Threaded Rigid Metal Conduit and IMC |
| For preventing passage of gases, vapors or flames from one portion of conduit system to another; Required in Class I, Division 1 and 2 locations within 18 IN of enclosures containing apparatus that may cause arcs, sparks or high temperatures; Required in Class I, Division 1 and 2 locations where 2 IN or larger conduit enters enclosure, fitting housing terminals, splices or taps; Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location; Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 IN or less conduit, seal must be located within 18 IN of either enclosure; Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in Class I, Division 2 locations; Explosionproof, dust-ignitionproof, raintight; Smooth, rounded integral bushing in each hub protects conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and ground continuity; U |