Appleton® EYDM-100AL Unilet® EYD Explosionproof Conduit Sealing Fitting With Removable Male Nipple, 1 in, Almag 35 Aluminum
Explosion Proof Conduit Sealing Fittings
941055
MFG #: EYDM100AL
Appleton™
131.98000
/ ea
- Application: For Use With Threaded Rigid Metal Conduit and IMC
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: EYDM100AL
- Connection: Tapered MNPT X Tapered FNPT
- Country of Origin: MX
- Currency: USD
- Dimensions: 4.06 in L x 1.56 in W
- EU RoHS Indicator: C
- Gross Weight Per Pack: 0.8900 lb
- Gross Weight per Pack Metric: 0.40
- Gross Weight UOM Metric: kg
- Height: 0.74 in
- Height [Metric]: 18.7960 mm
- Length: 11.30 in
- Length [Metric]: 28.7020 cm
- Series: EYDM
- Standard: UL 886 (1203), UL File Number E10444, CSA C22.2 No. 30, CSA 065181, UL Listed For Class I, Groups B, C, D; Class II, Groups E, F, G; And Class III
- Standards: UL 886UL 1203 File No. E10444CSA C22.2 No. 30CSA 065181RoHS Compliant
- Sub Brand: UNILETS
- Type: Dust-Ignitionproof Explosionproof Raintight
- UNSPSC: 39121311
- UPC 11: 78138161984
- UPC 12: 781381619844
- Width: 8.10 in
- Width [Metric]: 20.5740 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Finish: Epoxy Powder Coated
- Material: Almag 35 Aluminum
- Size: 1 in
- Suitable For Use With: IMC/Threaded Rigid Metallic Conduit
These Appleton sealing fittings minimizes the passage of gases and vapors and prevents the passage of flames from oneportion of a conduit system to another. They prevent pressure piling the within conduit system and contain any explosion that occurs.
- http://www.appletonelec.com(Seller Home Page URL)
- https://www.appleton.emerson.com/(Seller Home Page URL)
- Warranty URL - 11043_AFRVNTEYP0B9JHS4.pdf(Warranty URL)
- Spec Sheet URL(Spec Sheet URL)
- Warranty 1 URL - WAR_EGS_Terms_Conditions_Brand_Policies.pdf(Warranty 1 URL)
- Seller Home Page URL - appleton(Seller Home Page URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Applications
- Features
| For Use With Threaded Rigid Metal Conduit and IMC |
| For preventing passage of gases, vapors or flames from one portion of conduit system to another; Required in Class I, Division 1 and 2 locations within 18 IN of enclosures containing apparatus that may cause arcs, sparks or high temperatures; Required in Class I, Division 1 and 2 locations where 2 IN or larger conduit enters enclosure, fitting housing terminals, splices or taps; Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location; Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 IN or less conduit, seal must be located within 18 IN of either enclosure; Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in Class I, Division 2 locations; Explosionproof, dust-ignitionproof, raintight; Smooth, rounded integral bushing in each hub protects conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and ground continuity; U |
| Smooth, rounded integral bushing in each hub protects conductor insulation |
| Accurately tapped, tapered threads for tight, rigid joints and ground continuity |
| Dust-ignition proof, raintight |
| Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub |
| Close radius type for sealing vertical conduit runs |
| Restrict any explosion to the sealed off enclosure |
| Required in class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures |
| Required in class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps |
| Required in class I, Division 1 and 2 locations at the boundary where conduit leaves classified location |
| Required in class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure |
| Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in class I, Division 2locations |
| 2.06 in turning radius |
| Tapered MNPT X tapered FNPT connection |
| 25% fill vertical conduit drain sealing fittings |