Crouse-Hinds FSCT2 CONDULET CAST DEVICE BOX FOR THREADED RIGID AND IMC CONDUIT SINGLE GANG SHALLOW
Conduit Device Boxes
910456
MFG #: FSCT2
Crouse-Hinds
85.48000
/ ea
- Catalog Number: FSCT2
- Dimensions: 6-1/32 in H x 3-5/8 in W x 1-7/8 in D
- Gross Weight Per Pack: 2.6200 lb
- Mounting Type: Surface
- Suitable For Use With: Threaded Rigid/IMC Conduit
- Type: 3-Entry Type FSCT Shallow Tee
- UPC 11: 78227441500
- UPC 12: 78227441500
- Stock Status: NONSTOCK
- Brand: Crouse-Hinds
- Manufacturer: Eaton
- Finish: Electrogalvanized/Aluminum Acrylic Painted
- Material: Feraloy Iron Alloy
- Number of Gangs: 1
- Trade Size: 3/4 in
Conduit device boxes for installation in non-hazardous area conduit systems to accommodate wiring devices, act as pull boxes, or provide openings for taps and splices. Available in two box depths with a wide variety of hub configurations and sizes.
- Features
| Internal green ground screw standard on boxes |
| Suitable for use in wet locations when used with gasketed covers |
| Tapered threaded hubs with integral bushing |
| Ample wiring room |
| (1) side, (1) each end cable entry |
| Available as shallow (FS) or deep (FD) configuration |
| Ample wiring room provided in either FS or FD configuration |
| Wide selection of surface or flush covers available in three materials |
| Covers for flush mounting extend to conceal the rough plaster line |
| Available in single gang and multi-gang configurations with hubs, and as blank bodies for drilled and tapped openings |
| (1) side/(1) each end cable entry |
| Accommodate wiring devices |
| Act as pull boxes for conductors in a conduit system |
| Provide openings to make splices and taps in conductors |
| Provide access to conductors for maintenance and future system changes |
| Connect conduit sections |
| Electro galvanized/Aluminum Acrylic Painted finish |