Appleton® FM9™ Unilet® LR29 Type LR Conduit Body, 3/4 in Hub, 9, 8.5 cu-in, Aluminum, Natural
Type LR Conduit Fitting Body
916345
MFG #: APPLR29
Appleton™
27.95000
/ ea
- Application: For Use With Rigid Steel, Rigid Aluminum Conduit And IMC
- ARRA Compliant: N
- Buy American Compliant: C
- Catalog Number: APPLR29
- Connection: Tapered Female Threaded
- Connection Type: Tapered FNPT
- Country of Origin: MX
- Currency: USD
- Dimensions: 2.52 in L x 1.81 in W
- Enclosure: NEMA FB-1
- EU RoHS Indicator: C
- Gross Weight Per Pack: 0.4400 lb
- Gross Weight per Pack Metric: 0.20
- Gross Weight UOM Metric: kg
- Height: 0.80 in
- Height [Metric]: 20.3200 mm
- Length: 7.00 in
- Length [Metric]: 17.7800 cm
- Number of Hubs: 2
- Standard: UL 514A, UL 514B, UL File Number E2527, CSA C22.2 No. 18.3, CSA 065183, NEMA FB-1
- Standards: Buy American Act CompliantRoHS CompliantUL 514A/514B/E2527C22.2 No. 18.3CSA 065183
- Sub Brand: UNILETS
- Type: Type LR
- UNSPSC: 39131708
- UPC 11: 78138109431
- UPC 12: 781381094313
- Width: 5.00 in
- Width [Metric]: 12.7000 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Capacity: 8.5 in³
- Finish: Aluminum
- Form: 9
- Hub Size: 3/4 in
- Material: Copper Free Aluminum
FM9 Unilet conduit bodies provide plenty of room for pulling cables and wiring connections. Accurately tapped tapered threads ensure tight, rigid joints and excellent ground continuity.
- Catalog URL - Appleton_BC100_A_Brochure.pdf(Catalog URL)
- http://www.appletonelec.com(Seller Home Page URL)
- Seller Home Page URL - appleton(Seller Home Page URL)
- Spec Sheet URL - 11043_SPE_781381094672_spec.pdf(Spec Sheet URL)
- Spec Sheet URL - SPE_781381094672_spec.pdf(Spec Sheet URL)
- Warranty URL - 11043_AFRVNTEYP0B9JHS4.pdf(Warranty URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Applications
- Features
| For Use With Rigid Steel, Rigid Aluminum Conduit And IMC |
| Serve as pulling fittings; Make bends in conduit system; Provide openings for splicing; Connect and change direction of conduit runs; Allow connections for branch runs; Permit access to conductors for maintenance; Smooth, rounded integral bushings in hubs protect conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity; Roomy interiors: deep body cavity provides increased volume allowing higher wiring capacity; Completely interchangeable with Crouse-Hinds Mark9 bodies, gaskets and covers; Equivalent FM9 and Mark 9 units have identical applications and installation dimensions; Aluminum Unilets: produced from a high-strength copperfree aluminum alloy, for light weight and high corrosion resistance; Smooth hub openings allow easy conduit joining; Hub size, body style, compliance data, maximum wire number/size and cubic capacity molded into body; Flat back design fits flush against flat surfaces for more stable installation and provid |
| Roomy interiors - deep body cavity provides increased volume allowing higher wiring capacity |
| Smooth, rounded integral bushing in each hub protects conductor insulation |
| Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity |
| Completely interchangeable with Crouse-Hinds Mark 9 bodies, gaskets and covers |
| Aluminum UNILETS™ produced from a high strength copper free aluminum alloy, for light weight and high corrosion resistance |
| FM9™ covers with integral gasket are approved for use in wet locations |
| Covers are domed for extra wiring space |
| Smooth hub bushings and cover openings protect conductor insulation |
| Smooth hub openings allow easy conduit joining |
| Stainless steel pan head cover screws secure cover to body and provide superior screwdriver seating and torque |
| Hub size, body style, compliance data, maximum wire number/size and cubic capacity molded into body |
| Seven body style |
| Cover screws are captive to prevent loss in sizes |
| Hub size, body style, compliance data, maximum wire number/size and cubic capacity molded into body |
| Serve as pulling fittings make bends in conduit system, provide openings for splicing, connect and change direction of conduit runs, allow connections for branch runs, permit access to conductors for maintenance |
| Copper free aluminum |
| (3) 6 AWG maximum wire fill |
| Tapered FNPT connection |
| For use with rigid steel, rigid aluminum and IMC conduit |