Banner Engineering T30UXIAQ8 U-Gage™ T30UX Temperature Compensation Proximity Level Sensor, 100 to 1000 mm, 45 ms Response Time
Ultrasonic Reflex-Reflective - Block
643293
MFG #: T30UXIAQ8
BANNER®
429.11000
/ ea
The U-GAGE® T30UX is an easy-to-use ultrasonic sensor with extended range and built-in temperature compensation. Simple push button configuration provides flexibility for a variety of applications. Easy-to-see indicator LEDs communicate the status of the sensor. The Green "Power" LED ON indicates that the sensor is in Run Mode (the sensor's normal operating condition). The Red "Signal" LED indicates the target signal strength. The Amber "Output" LED indicates that the output is enabled and the sensor is receiving a signal within the window limits. The Amber "Mode" LED indicates the currently selected mode(fast or slow).
- Features
Built-in temperature compensation |
Fast, easy-to-use Teach-mode programming, no potentiometer adjustments |
Configure with either a positive or negative analog output slope |
Remote teach for security and convenience |
Compact, self-contained, right-angle sensor package with fully encapsulated electronics |
Protected against reverse polarity and transient overvoltage's |
Protected against short circuit conditions |
PBT polyester housing, polyester push buttons, epoxy/ceramic composite transducer |
30 mm diameter barrel housing |
Time of flight sensing mode |
Teach button adjustments |
Clear object detection |
4 to 20 mA analog output configuration |
0.1% of distance (0.5 mm minimum) analog resolution |
500 ms delay at power-up |
0.02% of sensing distance/deg C temperature effect |
30G 11 ms duration, half sine wave mechanical shock |
<1.6 V at 100 mA NPN/<3 V at 100 mA PNP output saturation voltage |
1 kOhm maximum at 24 VDC analog current output rating |
100 mA maximum discrete (switched) output |