Polywater® J J-128 High Performance Wire and Cable Pulling Lubricant, 1 gal Pail Container, Stringy Gel, Cream, 1

Cable Pulling Lubricants
61584 MFG #: J-128
Polywater®
29.97000 / ea
Polywater_J_J_128
  • Application: Use on all types of cables for long pulls, multiple bend pulls, and pulls in hot environments, underground and industrial cable pulls, communications and electrical cable, high conduit fill situations
  • Base Type: Water
  • Catalog Number: J-128
  • Container: pail
  • Country of Origin: USA
  • Currency: USD
  • Dielectric Strength: conductive
  • EU RoHS Indicator: Y
  • Flammability: Non-flammable
  • Flash Point: None
  • Grade: Specification
  • Gross Weight Per Pack: 37.0000 lb
  • Gross Weight per Pack Metric: 16.78
  • Gross Weight UOM Metric: kg
  • Height: 8.00 in
  • Height [Metric]: 20.3200 cm
  • Length: 17.00 in
  • Length [Metric]: 43.1800 cm
  • Lubricant Type: cable pulling lubricant
  • NSF Category Code: Does not apply
  • Odor: Does not apply
  • Odor|Scent: Faint Characteristic
  • pH Range: 7.5 to 9
  • Plastic Safe: Yes
  • Pour Point: Does not apply
  • Returnable: Y
  • SAE Grade: Does not apply
  • Size: 1 Gal
  • Standard: UL Listed, CSA Listed, IEEE 1210, ASTM Standard 1693
  • Standards: ARRA CompliantBuy American Act CompliantIEEE 1210UL ListedCSA CertifiedASTM D1693ASTM D512-88ASTM D1246-88ASTM D808-87ASTM D129-78ASTM D1179-88
  • Sub Brand: Polywater J
  • Temperature Rating: 20 to 120 °F
  • Type: Cable Pulling Lubricant
  • UNSPSC: 39121722
  • UPC 11: 02786800140
  • UPC 12: 02786800140
  • Viscosity: 25000 to 40000 cPs
  • VOC: 10 g/l
  • VOC Content: 10 g/L
  • Width: 17.00 in
  • Width [Metric]: 43.1800 cm
  • Working Temperature: 20° F - 120° F
  • Stock Status: NORMALLY STOCKED
  • Brand: Polywater®
  • Manufacturer: American Polywater Corporation
  • Color: Cream
  • Container Size: 1 gal
  • Container Type: Pail
  • Form: Stringy Gel
  • Specific Gravity: 1.00
Polywater® lubricant J is a high-performance cable pulling lubricant proven in the installation of millions of feet (meters) of cable over the last 20 years. Lubricant J provides excellent tension reduction in underground and industrial cable pulls. It is recommended for both communications and electrical cable. Polywater® J has excellent shear resistance for effective lubrication under high cable sidewall pressure in conduit bends. The residue from Polywater® J does not propagate flame when used with fire retardant cable systems. Lubricant J is slow drying. The residue is a thin, slippery film that retains its lubricity for months after use. Its dried residue is non-conductive and noncombustible. Polywater® lubricant J is a stringy gel. It can be applied by hand or using Polywater's LP Pumps. It is also available in the unique front end Pack pre-lubrication bags.
QTY
Add to Wishlist
  • Applications
  • Features
Use on all types of cables for long pulls, multiple bend pulls, and pulls in hot environments, underground and industrial cable pulls, communications and electrical cable, high conduit fill situations
high performance, clean, slow-drying, water-based, gel lubricant, nonstaining, field friendly packagaing, temperature stable, high cling factor
Maximum friction reduction
Clean and non-staining
High cling factor
Compatible with common cables
Temperature stable
Available in cold weather (non-freezing) formula
Available in pourable (liquid) formula
High performance, clean, slow drying, water based, gel lubricant, non-staining, field friendly packaging, temperature stable, high cling factor
It is especially recommended for long pulls, multiple bend pulls and pulls in a hot environment
It is harmless to humans, environmentally safe, compatible with all common cable jacket materials and can be easily applied as part of the unique Polywater® lubricant application system
Complex polymer
The most used and specified cable lubricant
The most used and specified cable lubricant