Decora® ODS15-TDI 1-Pole Vacancy Sensor, 120/230/277 VAC, PIR Sensor, 2100 sq-ft Coverage, 180 deg, Wall Mount
Wall Mount Vacancy Sensors
776144
MFG #: ODS15-TDI
Leviton®
79.86000
/ ea
- Application: Commercial
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: ODS15-TDI
- Color: Ivory
- Control Output: Manual On/Automatic Off
- Country of Origin: MX
- Currency: USD
- Dimensions: 46 in H x 1.75 in W x 1.85 in D
- Environmental Conditions: Operating Temperature (0 to +50 DEG C);Storage Temperature (-10 to +85 DEG C);Humidity (20% to 90% Non-Condensing)
- EU RoHS Indicator: C
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 0.3800 lb
- Gross Weight per Pack Metric: 0.17
- Gross Weight UOM Metric: kg
- Height: 4.62 in
- Height [Metric]: 11.7475 cm
- Lamp Type: Fluorescent/Incandescent
- Length: 2.88 in
- Length [Metric]: 7.3025 cm
- Mounting: WALL
- Power Consumption: 120 @ 120V;280 @ 277V MILWTT
- Power Rating: 120/280 mW
- Replaced Catalog Number: ODS15-GDI
- Response Frequency: 50/60 Hz
- Size: 46 H x 1.75 W x 1.85 D in
- Standard: UL Listed;cUL Listed Complies (24) and (20);FCC Regulations;NYC (L48);NOM
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantUL/cUL ListedFCC ApproveNOM CertifiedNAFTA CompliantTitle 24/20 CompliantNYC L48
- Sub Brand: Decora
- Supply Voltage: 120/230/277 VAC
- Temperature Rating: 0 to 50 °C
- Time Delay: 30 s to 20 min
- Type: Vacancy Sensor;Single-Pole Switch
- UNSPSC: 45111808
- UPC 11: 07847761224
- UPC 12: 078477612248
- Width: 1.88 in
- Width [Metric]: 4.7625 cm
- Stock Status: NONSTOCK
- Brand: Leviton®
- Manufacturer: Leviton Manufacturing Co., Inc.
- Coverage: 2100 ft²
- Mounting Type: Wall
- Sensor Type: PIR
- Viewing Angle: 180 °
- Voltage Rating: 120/230/277 VAC
The Leviton® Decora® wall switch passive infrared (PIR) vacancy sensor (ODS15-TD) uses passive infrared (PIR) detection technology to monitor a room for vacancy through a segmented fresnel lens. This specialized lens divides the field-of view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and keeps the lights ON. The lights will remain On as long as there is an occupant moving through the sensor zones.
- Brochure URL - 10962_KY3Q48SLZJG1PBT0.pdf(Brochure URL)
- Brochure URL - Data_Sheet_ODS15-TD.pdf(Brochure URL)
- Catalog URL - IDW_DOCUMENT_7c8abe3b89fd24b6d8a56c660c522ab4f2f06ca988e035854f83b5ce625e2dbe.pdf(Catalog URL)
- http://www.leviton.com(Seller Home Page URL)
- Install Instructions URL - Decora_ODS15_TDI_Installation.pdf(Install Instructions URL)
- Owners Manual URL - Decora_ODS15_TDI_Manual.pdf(Owners Manual URL)
- Safety Data Sheet URL - MSDS.pdf(Safety Data Sheet URL)
- Spec Sheet 1 URL(Spec Sheet 1 URL)
- Spec Sheet 2 URL - Decora_ODS15_TDI_Specification_Sheet_2.pdf(Spec Sheet 2 URL)
- Spec Sheet URL - 10962_53J0UF7RGWYHO641.pdf(Spec Sheet URL)
- Spec Sheet URL - ibcGetAttachment.jsp?cItemId=119391&label=IBE&appName=IBE(Spec Sheet URL)
- Applications
- Features
| Commercial |
| Fits in Standard Wallbox and Replaces Single-Pole Wall Switch, Ground Connection Required, Gangable with other Units, Low-Profile Design Eliminates Obtrusive "scanning-device" Look, Elegant Decora Wallplates Complement any Interior for Sleek Aesthetics, U |
| Fits in standard wallbox and replaces single-pole wall switch, gangable with other units, ground connection required |
| Low profile design eliminates obtrusive ''scanning-device'' look |
| Elegant Decora® wallplates compliment any interior for sleek aesthetics; uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices |
| 180 deg field of view provides approximately 2100 sq-ft of coverage |
| Convenient pushbutton provides manual-on/off light switching at any time |
| Two dual element PIR sensors used to widen detection range |
| Segmented fresnel lens provides optimum sensitivity and performance |
| Designed with an extensive ''minor motion'' area where even slight body movements will be detected |
| Vandal resistant PIR lens |
| Horizontal field of view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required |
| Manual-on/auto-off mode for installations where manual-on switching is required but auto-off switching is still desired for CA Title 20/24 and NYC L48 energy savings |
| Red LED indicator light flashes when sensor detects motion to verify detection is active |
| Time delay in adapting mode, the time delay can be configured from 30 sec (test mode), 5, 10, 20 min, in non-adapting mode, the delay can be configured from 5, 10, 20 and 30 min |
| Self-adjusting delayed Off time interval compensates for real time occupancy patterns, preventing unnecessary On/Off switching |
| Exclusive walk-through feature provides increased energy savings by not leaving the lights on for an extended period after only momentary occupancy |
| Vacancy confirmation when the time out expires and the lights turn Off a 30 sec VACancy confirmation exists to turn the lights back On |
| False detection circuitry |
| Exclusive Leviton® HIS circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service |
| No neutral design is optional for retrofit applications |
| One unit can be used for 120 to 277 VAC lighting, compatible with both electronic and magnetic ballasts |