Banner Engineering Multi-Beam® PBO 3/4-Wire Power Block, Photoelectric Sensor, 105 to 130 VAC

Sensor Power Blocks, Bases & Receptacles
139599 MFG #: PBO
BANNER®
100.48000 / ea
Banner_PBA
  • Catalog Number: PBO
  • Connection Type: Cable
  • Country of Origin: UA
  • Gross Weight Per Pack: 1 lb
  • Standards: CE Marked, CSA Approval, cULus Listed
  • Suitable For Use With: Multi-Beam® Compact Modular Photoelectric Sensors
  • Type: 3/4-Wire
  • UNSPSC: 39121004
  • UPC 11: 66248816391
  • UPC 12: 66248816391
  • Stock Status: NONSTOCK
  • Brand: BANNER®
  • Manufacturer: Banner Engineering Corp.
  • Output Type: SPST Isolated Optically Coupled Transistor
  • Sensor Type: Photoelectric
  • Voltage Rating: 105 to 130 VAC
These power blocks are designed to interface an electronic circuit (or control) at a low dc voltage level, but where there is no dc supply voltage available to power the MULTI-BEAM. Since the output is isolated it may be wired to either source or sink current, and multiple units may be wired in either series or parallel. The output of model PBO or PBOB will directly interface Banner component system logic modules. The low on-state saturation voltage allows direct interfacing to most solid-state low voltage dc logic systems or electronic totalizes.
QTY
Add to Wishlist
  • Features
These power blocks are designed to interface an electronic circuit (or control) at a low dc voltage level, but where there is no dc supply voltage available to power the sensor; Since the output is isolated it may be wired to either source or sink current, and multiple units may be wired in either series or parallel; The output of model will directly interface Banner component system logic modules; The low on-state saturation voltage allows direct interfacing to most solid-state low voltage dc logic systems or electronic totalizers; Output: SPST isolated optically coupled transistor; Wiring chamber
50/60 Hz input
50 mA, 30 VD maximum output
Less than 1 V at 2 mA, less than 1.3 V at 50 mA on-state saturation voltage
Less than 100 uA off-state leakage current
Range depends on sensor
Wiring chamber
2 m length cable connection