Banner Engineering Maxi-Beam® RPBR2 Power Block, Photoelectric Sensor, 12 to 250 VAC/12 to 30 VDC
Sensor Power Blocks, Bases & Receptacles
333641
MFG #: RPBR2
BANNER®
148.03000
/ ea
- Catalog Number: RPBR2
- Connection Type: Cable
- Country of Origin: USA
- Environmental Conditions: -40 to 50 deg C Operating Temperature
- Gross Weight Per Pack: 1 lb
- Standards: CSA Certified
- Suitable For Use With: Maxi-Beam® Modularized Photoelectric Sensors
- UNSPSC: 39121004
- UPC 11: 66248826610
- UPC 12: 66248826610
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: SPDT Electromechanical Relay
- Sensor Type: Photoelectric
- Voltage Rating: 12 to 250 VAC/12 to 30 VDC
RPBR2 is an SPDT output version of model RPBR, with both contacts common to terminal #1. Terminal #3 is normally open; terminal #4 is normally closed.
- Features
| Model RPBR operates the MAXI-BEAM with either AC or DC; RPBR2 is an SPDT output version of model RPBR, with both contacts common to terminal #1, terminal#3 is normally open, terminal #4 is normally closed; Contain an output switch for interfacing to loads or to control circuitry; include status LEDs which continuously indicate the state of the output circuit and input power |
| 50/60 Hz, 40 mA exclusive of load current input |
| 250 VAC 30 VDC maximum contact rating |
| Install MOV across contact if switching inductive load |
| 20 ms open and close contact response |
| 10000000 operations mechanical life |
| Range depends on sensor |
| Wiring chamber |
| 2 m length cable connection |