Red Lion® CUB5TCB0 CUB®5 Thermocouple Meter with Backlight Display
Digital Meter - Various Inputs
343099
MFG #: CUB5TCB0
Red Lion®
207.00000
/ ea
- Application Condition: Roughing
- Catalog Number: CUB5TCB0
- Color: Green;Red
- Display: LED
- Gross Weight Per Pack: 0.2000 lb
- Material: Plastic
- Series: CUB 5
- Type: Thermocouple Meter
- Stock Status: NORMALLY STOCKED
- Brand: Red Lion®
- Manufacturer: Red Lion Controls
- Case Type: Red Lion
- Measuring Range: -10 to 65;-200 to +1300 (N Type);-200 to +1372 (K Type);-200 to +1820 (B Type);-200 to +400 (T Type);-200 to +760 (J Type);-200 to +871 (E type);-50 to +1768 (R, S Type) mV °C
- Size: 0.48 in;12.2 mm
CUB®5 Thermocouple Meter with Backlight Display
- Features
| The CUB5T provides the ultimate in timer flexibility, from its complete user programming to the optional relay output and serial communications capability. The meter functions as an Elapsed Timer or Preset Timer. It also has a built-in Cycle Counter. The display can be toggled either manually or automatically between the Timer and Cycle Counter values. With eight different input operating modes and 18 selectable timer ranges, the meter can be programmed for a wide variety of timing applications.The CUB5T has an LCD display with 0.46 in (11.7 mm) high digits. The LCD is available in two versions, reflective (CUB5TR00) and backlight (CUB5TB00). The backlight version is user selectable for red or green backlighting with variable display intensity.The Timer has two signal inputs and eight input operating modes. These modes provide level active or edge triggered start/stop operation. A Display Hold mode will display the elapsed time for one cycle, while the next cycle continues timing internally. The Timer Reset modes will automatically reset the timer value when a time start edge is applied to the input. This allows sequential timing cycles without having to manually reset the Timer.In addition to the Timer inputs, a programmable User Input is available to perform a variety of meter functions. All inputs are current sinking (active low) and accept a variety of logic and open-collector output signal sources. Relay and switch contacts can also be used as signal sources, when the software input debounce filter is enabled.The capability of the CUB5T can be easily expanded with the addition of a field installable option module. When the CUB5RLY0 relay output module is added, the meter becomes a Preset Timer. The Setpoint Output can be assigned to the Timer or Cycle Counter values, and configured to suit a variety of control and alarm requirements. Serial communications capability for RS232 or RS485 is added with a serial option module (CUB5COM).The CUB5T can be powered from an optional Red Lion Micro-Line/Sensor Power Supply (MLPS), which attaches directly to the back of a CUB5T. The MLPS is powered from an 85 to 250 VAC source and provides up to 400 mA to drive the meter and sensors. |
| -Thermocouple Inputs Thermocouple types T, E, J, K, R, S, B, N, or mV |
| -Programmable Temperature Offset |
| -Selectable °F or °C Display Annunciators |
| -1 or 0.1 Degree Resolution |
| -Conforms to ITS-90 Temperature Standard |
| -Cold Junction Compensation (Enable/Disable) |
| -Minimum and Maximum Display Capture |
| -LCD, Green/Red LED Backlighting |
| -0.48 (12.2 mm) High Digits |
| -Optional Serial Communication Modules (RS-232 or RS-485) |
| -Optional Setpoint Cards available (Dual Sink or Relay) |
| -Optional USB Programming Card available |
| -Operates from 9 to 28 VDC Power Source |
| -Front Panel or Crimson® Programmable |
| -Display Color Change Capability at Setpoint Output |
| -NEMA 4X/IP65 Sealed Front Bezel |