Appleton® DBR1034DS DBR Dust Ignitionproof Explosionproof Receptacle With Disconnect Switch, 600 VAC, 100 A, 4 Poles, 3 Wires
Explosion Proof Receptacle W/Disconnect
953880
MFG #: DBR1034DS
Appleton™
5571.84000
/ ea
- ARRA Compliant: C
- Buy American Compliant: N
- Catalog Number: DBR1034DS
- Country of Origin: MX
- Currency: USD
- EU RoHS Indicator: C
- Gross Weight Per Pack: 30.8500 lb
- Gross Weight per Pack Metric: 13.99
- Gross Weight UOM Metric: kg
- Height: 22.00 in
- Height [Metric]: 55.8800 cm
- Horsepower: 75 hp
- Length: 22.60 in
- Length [Metric]: 57.4040 cm
- Material: Copper Free Aluminum
- NEMA Rating: NEMA 3/3R/4/4X/9FG
- Series: DBR
- Standards: ARRA CompliantRoHS CompliantUL 1010 (UL 1203)UL 894UL 1682UL 1686UL File No. E79132/E10784/E313360(EBR)Class I, Div 1 and 2, Groups B, C, D, Class II, Div 1 and 2, Groups F, G, Class III
- Type: Dust-Ignitionproof Grounding Style 2
- UNSPSC: 39121406
- UPC 11: 78138147481
- UPC 12: 781381474818
- Width: 19.30 in
- Width [Metric]: 49.0220 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Amperage Rating: 100 A
- Number of Wires: 3
- Voltage Rating: 600 VAC
- Number Of Poles: 4
Appleton® Explosionproof Receptacle, Dust Ignitionproof, Series: DBR, 600 VAC, 100 A, 75 hp, 4 Pole, 3 Wires, NEMA 3/3R/4/4X/9FG, Aluminum
- Features
| Energized receptacle contacts deeply recessed to reduce danger of accidental touching |
| Style 2 (shell and extra pole) grounding |
| Spring door keeps dust out of receptacle when plug is not in use screw cap also supplied |
| Brass contacts exert constant pressure along entire contact surface and provide superior electrical contact |
| Contacts have beryllium copper wire springs |
| Plug mechanical cable clamps prevent strain on cables they meet or exceed UL strain relief pull-out requirements |
| Neoprene bushing compressed by cable collar prevents entrance of water |
| Insulators provide superior dielectric and mechanical strength and lowest arc tracking |
| 1-1/2 in NPT tapped conduit openings one top two bottom |
| Interlocked disconnect switch provides safe connect and 2 or 3-pole, non-fused motor circuit switch |
| Interlocked circuit-breaker provides interlocked connect and disconnect operation as well as short circuit and thermal time delay overload protection DBR permits safe operation in class II and III only |
| To operate, insert plug (which automatically locks into receptacle) and turn breaker handle to ON position to remove plug, turn handle to OFF position, lift plug release knob and pull plug out |
| ACP and CPH plug fits Powertite™ series hazardous location and DBR receptacles |
| Copperfree (4/10 of 1% maximum) aluminum receptacle and mounting box |
| Fiber glass reinforced polyester insulating blocks |
| Epoxy powder coat finish |