3M™ 5300 Splice Kit, 0 to 1000 VAC, 250 kcmil to 500 kcmil Feeder Cable, 4/0 AWG to 500 kcmil Motor Lead Conductor
Insulated Splice Kit, Low Voltage (below 5 KV)
153918
MFG #: 7000005808
3M™
162.10000
/ ea
- Alternate Catalog Number: 5304
- ARRA Compliant: X
- Buy American Compliant: X
- Cable Size: 250-500
- Cable Type: motor lead pigtail
- Catalog Number: 7000005808
- Country of Origin: US
- Currency: USD
- EU RoHS Indicator: Y
- Expiry|Spoilage Date Applicable Indicator: Y
- Gross Weight Per Pack: 1.4000 lb
- Gross Weight per Pack Metric: 0.64
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8546900000
- Height: 4.30 in
- Height [Metric]: 10.9220 cm
- Length: 9.30 in
- Length [Metric]: 23.6220 cm
- Material Composition Declaration: RoHS 2011/65/EU compliant without exemption
- Number Of Cables: 3
- Returnable: Y
- Standards: CSA Certified, RoHS 2011/65/EU Compliant
- Type: Pigtail (1 hole lugs)
- UNSPSC: 31270000
- UPC 11: 05400712266
- UPC 12: 054007122661
- Width: 5.60 in
- Width [Metric]: 14.2240 cm
- Stock Status: NONSTOCK
- Brand: 3M™
- Manufacturer: 3M™
- Voltage Rating: 1k V
3M 5300 Series Motor Lead Pigtail Splice Kit is perfect to use with copper compression, 1-hole lugs. It is designed to splice motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000V or less.
- Compliance Cert URL - Scotch_054007_10083_Compliance_Certificate.pdf(Compliance Cert URL)
- http://www.3m.com(Seller Home Page URL)
- Install Instructions 1 URL - 11579_9F4C2KTZJ6OEG35Y.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - motor-lead-pigtail-splice-kits-5302-5303-5304.pdf(Install Instructions 1 URL)
- Install Instructions URL - motor-lead-pigtail-splice-kits-5302-5303-5304.pdf(Install Instructions URL)
- Safety Data Sheet URL - t15pdulyob7qityw3ssm.pdf(Safety Data Sheet URL)
- Seller Home Page URL - Country(Seller Home Page URL)
- Spec Sheet URL - 11579_18575.pdf(Spec Sheet URL)
- Spec Sheet URL - motor-lead-splicing-kits-5300-series.pdf(Spec Sheet URL)
- Tech Drawing URL - 11579_E8BRI3Y4APJ1ULD7.pdf(Tech Drawing URL)
- Tech Drawing URL - mediawebserver?mwsId=sssss72sFWtTz8Uun890Py_sFWuRFWtsFWtsFWtsFssssss--(Tech Drawing URL)
- Features
Fast and simple installation |
No torches or heat source required |
No special tools required to install splice |
Thick walls to resist puncture and abrasion damage |
High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress |
Easy re-entry, can be used on cables with a rated operating temperature of 90 deg C and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 V and less cables sized 16 AWG to 500 Kcmil |
5/8 kV Shielded and non-shielded feeder cables sized 8 AWG to 500 KCMIL, polyethylene cable, cross-linked polyethylene cable (xlp), ethylene propylene rubber cable (epr), copper conductors |
1-1/2 in maximum bolt length |
1.7 in lug cover inner diameter |
6.7 in lug cover length |
1400 PSI tensile strength |
750% elongation |
365 V/mil dielectric strength |
1/Case |