3M™ 5300 Splice Kit, 0 to 1000 VAC, 250 kcmil to 500 kcmil Feeder Cable, 4/0 AWG to 500 kcmil Motor Lead Conductor
Insulated Splice Kit, Low Voltage (below 5 KV)
153918
MFG #: 7000005808
3M™
171.08000
/ ea
3M 5300 Series Motor Lead Pigtail Splice Kit is perfect to use with copper compression, 1-hole lugs. It is designed to splice motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000V or less.
- Compliance Cert URL - Scotch_054007_10083_Compliance_Certificate.pdf(Compliance Cert URL)
- http://www.3m.com(Seller Home Page URL)
- Install Instructions 1 URL - motor-lead-pigtail-splice-kits-5302-5303-5304.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - 11579_9F4C2KTZJ6OEG35Y.pdf(Install Instructions 1 URL)
- Safety Data Sheet URL - t15pdulyob7qityw3ssm.pdf(Safety Data Sheet URL)
- Install Instructions URL - motor-lead-pigtail-splice-kits-5302-5303-5304.pdf(Install Instructions URL)
- Seller Home Page URL - Country(Seller Home Page URL)
- Spec Sheet URL - 11579_18575.pdf(Spec Sheet URL)
- Tech Drawing URL - mediawebserver?mwsId=sssss72sFWtTz8Uun890Py_sFWuRFWtsFWtsFWtsFssssss--(Tech Drawing URL)
- Tech Drawing URL - 11579_E8BRI3Y4APJ1ULD7.pdf(Tech Drawing URL)
- Spec Sheet URL - motor-lead-splicing-kits-5300-series.pdf(Spec Sheet URL)
- Features
| Fast and simple installation |
| No torches or heat source required |
| No special tools required to install splice |
| Thick walls to resist puncture and abrasion damage |
| High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress |
| Easy re-entry, can be used on cables with a rated operating temperature of 90 deg C and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 V and less cables sized 16 AWG to 500 Kcmil |
| 5/8 kV Shielded and non-shielded feeder cables sized 8 AWG to 500 KCMIL, polyethylene cable, cross-linked polyethylene cable (xlp), ethylene propylene rubber cable (epr), copper conductors |
| 1-1/2 in maximum bolt length |
| 1.7 in lug cover inner diameter |
| 6.7 in lug cover length |
| 1400 PSI tensile strength |
| 750% elongation |
| 365 V/mil dielectric strength |
| 1/Case |