SolaHD PCB1B-WKEY Base Connector, For Use With Edco PC642 Series Surge Suppressor
Surge Protector Accessories
762146
MFG #: PCB1B-WKEY
SolaHD™
20.74000
/ ea
- Amperage Rating: 150m A
- Application: The Edco PC642 surge suppressor is a two-pair (four-wire) module implementing three-stage hybrid technology. This module addresses over-voltage transients with gas tubes and silicon avalanche components.
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: PCB1B-WKEY
- Connection: Terminal block w/compression lugs
- Country of Origin: CN
- Currency: USD
- Dimensions: 2.4 in H x 1 in W
- EU RoHS Indicator: Y
- Finish: Gold Plated
- Frequency Rating: 0-20M Hz
- Gross Weight Per Pack: 0.1800 lb
- Gross Weight per Pack Metric: 0.08
- Gross Weight UOM Metric: kg
- Height: 1.25 in
- Height [Metric]: 3.1750 cm
- Length: 6.20 in
- Length [Metric]: 15.7480 cm
- Operating Temperature: -40 DEG C to +85 DEG C
- Short Circuit Rating: Peak Surge Current: 10 kA (8 x 20 microseconds)
- Size: Terminals accept up to 10 AWG AWG
- Standard: Not Listed
- Sub Brand: Edco
- UNSPSC: 39121610
- UPC 11: 63391416876
- UPC 12: 633914168766
- Voltage Rating: 250/300 V
- Width: 4.30 in
- Width [Metric]: 10.9220 cm
- Stock Status: NONSTOCK
- Brand: SolaHD™
- Manufacturer: Emerson
- Specifications: 0.15 A Current, 5 to 250 VDC Operating Voltage, 8 to 300 VDC Clamping Voltage, 10 kA Peak Surge Current, 20 MHz Frequency, -40 to 85 deg C Temperature
- Suitable For Use With: Edco PC642 Series Surge Suppressor
- Type: Female
SolaHD Base Connector, For Use With: Edco PC642 Series Surge Suppressor, 5 to 250 VAC Operating Voltage, 8 to 300 VAC Clamping Voltage
- Applications
- Features
The Edco PC642 surge suppressor is a two-pair (four-wire) module implementing three-stage hybrid technology. This module addresses over-voltage transients with gas tubes and silicon avalanche components. |
Three-stage hybrid protection, Sneak/fault current protection, Resettable fusing - PTCs, Low capacitance, Plug-in module, Fast response time, Requires Edco PCB1B-WKEY mounting base |