Appleton® N1D75-15B Intraground® N1 Explosionproof Enclosed Circuit Breaker, 120/240 VAC, 15 A, 1 Pole, Thermal Trip
Explosion Proof Circuit Breakers
451658
MFG #: N1D75-15B
Appleton™
978.49000
/ ea
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: N1D75-15B
- Country of Origin: MX
- Currency: USD
- Depth: 5.63 in
- Electrical Ratings: 15 A 120/240 VAC
- EU RoHS Indicator: C
- Finish: PTFE/Mylar®
- Gross Weight Per Pack: 4.0000 lb
- Gross Weight per Pack Metric: 1.81
- Gross Weight UOM Metric: kg
- Height: 6.00 in
- Height [Metric]: 15.2400 cm
- Length: 7.00 in
- Length [Metric]: 17.7800 cm
- Material: Thermoplastic Polyetherimide
- Mounting Type: Surface
- NEMA Rating: NEMA 3R/4X/12/7CD
- Series: N1 Series
- Standards: UL 1203UL File No. E59122NEC Class I, Div 1 and 2, Groups C, DRoHS Compliant
- Type: Bolted Dead End Non-Factory Sealed Non-Metallic
- UNSPSC: 39121521
- UPC 11: 78138147629
- UPC 12: 781381476294
- Width: 7.00 in
- Width [Metric]: 17.7800 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
Appleton explosionproof, non-factory sealed Intraground N1 Series circuit breakers and enclosures provide short circuit protection and a safe disconnect means in a non-metallic design. They provide thermal time delay overload protection for branch circuits for lighting, appliance and motor circuits. The Intraground N1 Series is ideal for use in corrosive atmospheres, they are suitable for use in Class I, Division 1 atmospheres when properly installed with sealing fittings at all conduit entries.
- Features
| Constructional feature explosion proof, dust-Ignition proof |
| Furnished with lead wires for ease of connection |
| Handle may be locked in On or Off position |
| Metal imbedded grounding grid - no need to install special wires and parts for grounding |
| Labyrinth-path construction ensures flame-tight construction |
| Close-tolerance threaded stainless steel shaft meets explosionproof requirements |
| Silicone gasket, specially designed for the labyrinth-path joint, prevents entrance of moisture without interfering with the venting of cooled hazardous gases and vapors |
| Superior resistance to impact, crushing, ultraviolet light, water, fungi and mold |
| Furnished with a 3/4 in to 1/2 in NPT reducer |
| 30% glass-reinforced thermoplastic polyetherimide body and cover, 6/6 nylon handle, Teflon coated stainless steel cover bolts, Mylar coated aluminum nameplate |
| Dead end hub location |
| 1/2 in or 3/4 in hub |