Fluke® FLUKE-805-FC Vibration Meter, 10 to 1000 Hz, 100 Hz +/-5%, 0.01 g Resolution, Graphical Monochrome LCD Display
Vibration Meters
871361
MFG #: FLUKE-805 FC
Fluke®
2805.99000
/ ea
- Catalog Number: FLUKE-805 FC
- Country of Origin: UKN
- Depth: 5.8 cm
- Gross Weight Per Pack: 2.5500 lb
- Length: 24.1 cm
- Standards: PROP65: This product is in compliance with Prop65; it is not known to contain any chemicals associated with this regulation
- UNSPSC: 41114514
- UPC 11: 09596972686
- UPC 12: 09596972686
- Width: 7.1 cm
- Stock Status: NONSTOCK
- Brand: Fluke®
- Manufacturer: Fluke Corporation
- Battery Type: Lithium Iron Disulfide
- Display Type: Graphical Monochrome LCD
- Frequency Rating: 10 to 1000 Hz
- Resolution: 0.01 g
The Fluke® 805 FC is not a vibration pen, its a meter. A Fluke meter that eliminates the confusion of vibration screening and provides reliable measurements you can trust to make critical go or no-go maintenance decisions.
- Catalog URL - IDW_DOCUMENT_5c7a5d85c41a308a1a34e6354f9ea610404b6c9656ceae987dd5344e57bbd864.pdf(Catalog URL)
- http://www.fluke.com/(Seller Home Page URL)
- Install Instructions URL - 805_____umeng0200.pdf(Install Instructions URL)
- Spec Sheet URL - 6002302e-en-805fc-ds-w.pdf?KaIfhBFz0VIYU5tj7GKJV.k1RwtA4xcA(Spec Sheet URL)
- Features
| Four-level severity scale assesses urgency of problems for overall vibration and bearing condition |
| Innovative sensor design minimizes measurement variations caused by device angle or contact pressure |
| Consistent data quality at both low and high frequency ranges |
| Four-level severity scale assesses urgency of problems for overall vibration and bearing condition |
| Exportable data via USB |
| Trending in Microsoft® excel using pre-built templates |
| Overall vibration measurement (10 to 1000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines |
| Crest factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4000 Hz and 20000 Hz |
| Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements |
| Temperature measurement with Spot IR Sensor increases diagnostic capabilities |
| On-board memory holds and saves up to 3500 measurements |
| External accelerometer support for hard to reach locations |
| Flashlight for viewing measurement locations in dark areas |
| Large screen with high resolution for easy navigation and viewing |
| USB mini-B 7-pin, external sensor jack (SMB connector) connectors |