Greenlee® 851 Electric PVC Bender, 1/2 to 4 in, 120 VAC, PVC Coated
Conduit Benders - Electric
89763
MFG #: 851
Greenlee®
1654.10000
/ ea
- Amperage Rating: 20 A
- Application: PVC Heating
- ARRA Compliant: Y
- Battery: None
- Bend Radius: Flexible
- Buy American Compliant: X
- Catalog Number: 851
- Construction: Heavy Duty, Insulated Metal Walls
- Country of Origin: US
- Currency: USD
- Dimensions: 52 in L
- EU RoHS Indicator: U
- Gross Weight Per Pack: 53.0000 lb
- Gross Weight per Pack Metric: 24.04
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8516808000
- Height: 13.00 in
- Height [Metric]: 33.0200 cm
- Length: 58.00 in
- Length [Metric]: 147.3200 cm
- Marking: None
- Material: Steel
- Standards: ARRA Compliant
- Tool|Kit: Bare Tool
- Type: PVC Heater
- UNSPSC: 27112732
- UPC 11: 78331035577
- UPC 12: 783310355779
- Wattage: 2,300/3,600 W
- Width: 14.80 in
- Width [Metric]: 37.5920 cm
- Stock Status: NONSTOCK
- Brand: Greenlee®
- Manufacturer: Greenlee Textron
- Capacity: 1/2'' - 4.000'' PVC All Schedules Pipe in
- Housing Material: Steel
- Voltage Rating: 120 VAC
From rugged hand benders to the full-featured smart quad Bender™ which calculates complete layout measurements, greenlee benders are the industry standard for bending EMT, IMC, PVC and rigid conduit. refer to our easy-to-use selection guide for choosing a greenlee bender or accessory that will get the job doneright the first time.
- http://www.greenlee.com(Seller Home Page URL)
- http://www.greenlee.com/(Seller Home Page URL)
- Install Instructions URL - IDW_DOCUMENT_1520572647312.pdf(Install Instructions URL)
- Safety Data Sheet URL - ?f05bad6d-5855-11e4-bc08-c81f66f24c6b(Safety Data Sheet URL)
- Spec Sheet URL - 783310355779(Spec Sheet URL)
- Applications
- Features
| PVC Heating |
| Easy to use preheat for 10 minutes, open lid and position PVC, close lid, rotate until pliable, open lid, remove PVC and form bend Heavy-duty, insulated metal walls and cover with reflective interior for efficient, even heat Full-length door for easy loading and unloading On/off switch with indicator light Sturdy wheels for easy mobility Use two units in tandem to heat large sweep bends Heats 50" long section of pipe |
| Easy to use preheat for 10 min, open lid and position PVC, close lid, rotate until pliable, open lid, remove PVC and form bend |
| Heavy duty, insulated metal walls and cover with reflective interior for efficient, even heat |
| Full length door for easy loading and unloading |
| ON/OFF switch with indicator light |
| Sturdy wheels for easy mobility, use two units in tandem to heat large sweep bends |
| Heats 50 in L section of pipe |
| 35592 calrod heating element replacement part |
| Heavy duty, insulated metal walls |