Bogen® C35 Classic PA Amplifier, 120 VAC, 85 W

PA System Amplifiers
PDW~6740931 MFG #: C35
Bogen®
577.10000 / ea
IDW_Bogen_C35
  • Catalog Number: C35
  • Connection Type: Screw Terminal For MIC and TEL/AUX Hi-Z Jack Input/Screw Terminal Strip/TAPE/BOOSTER Jack/WMT1A Jack Output
  • Country of Origin: CN
  • Dimensions: 3-3/4 in H x 14-1/2 in W x 11 in D
  • Gross Weight Per Pack: 1 lb
  • Sensitivity: MIC Lo-Z Balanced 600 uV/AUX 85 mV/TEL 75 mV Input
  • Series: Classic
  • Specifications: 1% Maximum Transformer 0.5% Maximum 4 Ohm Direct Output
  • Standards: UL 60065 Listed
  • UNSPSC: 52161547
  • UPC 11: 76536833033
  • Stock Status: NONSTOCK
  • Brand: Bogen®
  • Manufacturer: Bogen Communications, Inc.
  • Power Rating: 85 W
  • Voltage Rating: 120 VAC
The Bogen Classic Series Models C35, C60, and C100 are public address mixer amplifiers that provide mixing of microphones, telephone, and auxiliary sources. Output screw terminals are provided for 4 Ohm (direct) and 8-ohm (C35 & C60 models only), 16-ohm, 25V and 70V (transformer-coupled) speaker systems. Output jacks let you connect to a tape recorder or an additional booster amplifier, or feed a 600 Ohm telephone line when an accessory transformer (Model WMT1A) is used.
QTY
Add to Wishlist
  • Features
Offer high performance, flexibility, and reliability for most applications requiring a variety of inputs ; 4 inputs: 1 microphone(Low impedance), 1 auxiliary (High impedance), 1 telephone, plus 1 selectable microphone or auxiliary ; Each input controlled by an independent volume control ; Treble and bass controls ; Auxiliarymuting by external contact closure for push-to-talk microphones ; Telephone input for telephone paging applications ; Telephoneinput voice-activated (VOX) mute over auxiliaryinput ; Variable threshold for telephone input voice activated auxiliarymute ; Outputs for 4 OHM (direct) and 16 OHM, 25 V and 70 V speaker systems (transformer coupled) ; Output jack to connect a recording device or booster amplifier ; Output jack to connect a general-purpose 600 OHM matching transformer (model WMT1A) ; Thermal protection and electronic shutdown ; Rack mountable with accessory mounting kit (model RPK50) ; Hum and Noise (below rated output): 55 DB (Microphone), 70 DB (Auxiliary), 70 DB (Telephone) ; Input Sensitivity: 600 MICV (microphone low impedance balanced), 85 MILV (Auxiliary), 75 MILV (Telephone)
Treble, +/-11 dB at 10 kHz, Bass +/-11 dB at 100 Hz tone control
399.6 BTU/HR thermal emission
25/70 VAC Output
70 Hz - 16 kHz (+/- 2 dB) at 1% max Transformer, 20 Hz - 20 kHz (+/- 1 dB) at 0.5% max 4 Ohm Direct Output
85 W required
35 W RMS
60 Hz frequency