Sandvik Coromant 5730416 CoroTurn® 107 Basic Shape Positive Turning Insert, DCGT 3(2.5)0-UM 1125, D-55 deg Diamond
DCGT Turning Inserts
554212
MFG #: 2
Sandvik Coromant
27.79000
/ ea
- Alternate Catalog Number: DCGT 3(2.5)0-UM 1125
- ANSI Code: DCGT 3(2.5)0-UM 1125
- Catalog Number: 2
- Corner Radius: 0.0078 in
- Country of Origin: JP
- Finish: PVD Coated
- Gross Weight Per Pack: 0.0100 lb
- Hand of Insert: Neutral
- Hole Diameter: 0.1732 in
- Included Angle: 55 deg
- ISO Code: DCGT 11 T3 02-UM 1125
- Item Group: 130
- Length: 0.4577 in
- Relief Angle: 7 deg LB
- Series: CoroTurn® 107
- Thickness: 0.1562 in
- Type: Basic Shape Positive
- UPC 11: 69826243606
- UPC 12: 69826243606
- Width: UM
- Stock Status: NORMALLY STOCKED
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: UM
- Cutting Direction: Neutral
- For Use On: Stainless Steel, Non-Ferrous Metals, Heat Resistant Super Alloys and Titanium
- Inscribed Circle: 3/8 in
- Insert Size: D - 55 deg Diamond
- Insert Style: DCGT
- Manufacturer's Grade: 1125
- Material: Carbide
- Material Grade: M/N/S
- Maximum Depth of Cut: 1.5 mm
- Rake: Positive
- Seat Size: 11
- Shape: D-55 deg Diamond
Sandvik Coromant Turning Insert, Basic Shape Positive, Series: CoroTurn® 107, DCGT Insert, D-55 deg Diamond, 1.5 mm Maximum Depth of Cut, 3/8 in Inscribed Circle, 0.1562 in Thickness, 0.4577 in Length, UM Chipbreaker, 0.0078 in Corner Radius, 0.1732 in Hole Dia, Manufacturer's Grade: 1125, ANSI Code: DCGT 3(2.5)0-UM 1125, ISO Code: DCGT 11 T3 02-UM 1125, 55 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, PVD Coated, Material Grade: M/N/S
- Features
| 40 - 60 deg countersunk hole and non-flat surface clamping interface |
| 1-side cutting |
| +/-0.13 mm THK and +/-0.025 mm inscribed circle tolerance |
| Sharp cutting edge |
| Solid carbide is extremely heat-resistant and used for high speed applications on cast iron, non-ferrous materials, plastics and other tough-to-machine materials |
| For external machining of small, long, slender components and internal machining |
| The positive insert shape combines low cutting forces with good edge strength |
| The screw clamping ensures stability and unobstructed chip flow |
| 0.01 - 0.08 mm/r cutting feed |
| 20 life cycle state |