Milwaukee® 48-20-7092 2-Cutter Heavy Duty With Hex Shoulder, 3/16 in Dia x 7 in L, 4 in Cutting, 25/64 in SDS Plus® Shank, Carbide Cutting Edge, Carbide
Hammer Drill Bits
3309
MFG #: 48-20-7092
Milwaukee®
8.82000
/ ea
- Alternate Catalog Number: 48207092
- Applicable Materials: Concrete and Masonry
- Application: For Fast Removal of the Concrete Dust from the Hole
- ARRA Compliant: C
- Bit Diameter: 3/16 IN in
- Buy American Compliant: C
- Catalog Number: 48-20-7092
- Country of Origin: DE
- Currency: USD
- Cutting Direction: Right Hand
- Drill Size: 4 IN Depth
- Drilling Depth: 4.000000 in
- EU RoHS Indicator: C
- Flute Length: 4
- Gross Weight Per Pack: 0.1200 lb
- Gross Weight per Pack Metric: 0.05
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8207502030
- Height: 10.50 in
- Height [Metric]: 26.67 cm
- Length: 0.41 in
- Length [Metric]: 1.0414 cm
- Material: Carbide Tipped, Steel Shank
- Number of Points: 2
- Point Type: Centering
- Series: Stardrill B3215-F
- Standards: ARRA CompliantBuy American Act CompliantANSI Specified
- Sub Brand: MILWAUKEE
- Type: 2-Cutter Heavy Duty
- UNSPSC: 20121613
- UPC 11: 04524210867
- UPC 12: 04524210867
- Warranty Description: No Warranty
- Width: 1.75 in
- Width [Metric]: 4.445 cm
- Stock Status: NORMALLY STOCKED
- Brand: Milwaukee®
- Manufacturer: Milwaukee Tool
- Cutting Depth: 4
- Cutting Edge Material: Carbide
- Drill Bit Size: 3/16
- Overall Length: 7 in
- Shank Size: 1/4 IN Diameter
- Shank Type: SDS, Hex
The Milwaukee® SDS Plus Bits with 1/4 in Hex are designed specifically for Tapcon® screw applications. Built to take on brick, block and concrete Milwaukee® SDS bits feature 2-cutter geometry for fast drilling and debris removal. The patented, reinforced flute design increases impact resistance and transfers energy directly to the bit tip. Patented rebar chamfers withstand impact from rebar and hard aggregate and reduce carbide chipping. To be used with Drive Sleeve available in the SDS-Plus Tapcon® Installation Kit (48-20-7497).
- Applications
- Features
| For Fast Removal of the Concrete Dust from the Hole |
| 3/16 IN Diameter, 2-Cutter Head; SDS Shank With Hex Shoulder For Tap-Con Screw System; Drilling Depth 4 IN; Overall Length 7 IN |
| SDS shank with hex shoulder for Tap-Con screw system |