Decora® ODS10-IDT 1-Pole Single Relay Wall Mount Occupancy Sensor, 120/230/277 VAC, Passive Infrared Sensor, 180 deg
Occupancy Sensors
364970
MFG #: ODS10-IDT
Leviton®
53.91000
/ ea
- Application: Commercial
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: ODS10-IDT
- Color: Light Almond
- Control Output: Manual On/Automatic Off
- Country of Origin: CN
- Currency: USD
- Dimensions: 46 in H x 1.75 in W x 1.85 in D
- Environmental Conditions: Operating Temperature (0 to +50 DEG C);Storage Temperature (-10 to +85 DEG C);Humidity (20% to 90% Non-Condensing)
- EU RoHS Indicator: C
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 0.3200 lb
- Gross Weight per Pack Metric: 0.14
- Height: 4.62 in
- Lamp Type: Fluorescent/Incandescent
- Length: 2.88 in
- Mounting: WALL
- Power Consumption: 100 @ 120V;250 @ 277V MILWTT
- Power Rating: 100/250 mW
- Response Frequency: 50/60 Hz
- Size: 46 H x 1.75 W x 1.85 D in
- Standard: UL Listed;CSA Certified;CEC;Title 24;FCC Regulations;NOM
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantUL ListedCSA CertifiedNOM CertifiedFCC CertifiedCEC Title 20/24 Compliant
- Sub Brand: Decora
- Supply Voltage: 120/230/277 VAC
- Temperature Rating: 0 to 50 °C
- Time Delay: 30 s to 30 min
- Type: Occupancy Sensor;Single-Pole Switch
- UNSPSC: 45111808
- UPC 11: 07847727746
- UPC 12: 078477277461
- Width: 1.88
- Width [Metric]: 4.7625
- Stock Status: NORMALLY STOCKED
- Brand: Leviton®
- Manufacturer: Leviton Manufacturing Co., Inc.
- Coverage: 2100 ft²
- Voltage Rating: 120/230/277 VAC
- Mounting Type: Wall
- Sensor Type: PIR
- Viewing Angle: 180 °
The Leviton Decora® wall switch passive infrared (PIR) occupancy sensor (ODS10-ID) uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zones.
- http://www.leviton.com(Seller Home Page URL)
- Install Instructions URL - DI-000-ODS10-00F-W.pdf(Install Instructions URL)
- Safety Data Sheet URL - MSDS.pdf(Safety Data Sheet URL)
- Spec Sheet URL - 10962_2CFS3NT8RIBAEQMZ.pdf(Spec Sheet URL)
- Spec Sheet URL - Data_Sheet_-_Decora_Wall_Switch_PIR_Occupancy_Sensor_%28ODS10-ID%29.pdf(Spec Sheet URL)
- Video - https://www.youtube.com/embed/jK48BrNhHBw(Video)
- Applications
- Features
| Commercial |
| Fits in Standard Wallbox and Replaces Single-Pole Wall Switch, 180ª Field-Of-View Provides Approximately 195m2 of Coverage Suitable for Small Offices, Conference Rooms, Classrooms, Lounges and a Variety of Commercial Areas, Convenient Pushbutton Provides |
| Neutral wire not required |
| Grounding wire required |
| External power pack not required |
| Commercial grade and internal photocell |
| Ambient light Override |
| 800 W at 120 VAC primary relay incandescent, 1200VA at 120 VAC, 2700VA at 277 VAC primary relay fluorescent, 1/4 hp at 120 VAC motor load ratings |
| -10 to 85 deg C storage temperature range |
| 20% to 90% non-condensing relative humidity |
| For indoor use only |
| Fits in standard wallbox and replaces single-pole wall switch |
| Low-profile design eliminates obtrusive "scanning-device" look |
| 180 deg field-of-view provides approximately 2100 square feet of coverage |
| Convenient pushbutton provides manual-on/off light switching at any time |
| Two dual element PIR sensors used to widen detection range |
| Vandal resistant PIR lens |
| Manual-on/auto-off mode for installations where manual-on switching is required but auto-off switching is still desired for CEC Title 24 energy savings |
| Light sensor enables the load hold-off feature once level has been set |
| False detection circuitry |
| Motor load type |