Lithonia Lighting® CMR-PC CMR Line Voltage On/Off Photocell Sensor, 120 to 277 VAC, Single Gang Handy Box Mount
Fixed Position Mounting Photocontrols
554095
MFG #: CMR PC
SensorSwitch™
82.83000
/ ea
- Alternate Catalog Number: 184FF4
- Amperage Rating: 20 mA
- Application: Conference Room, Corridor, Open Office, Private Office, Restroom
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: CMR PC
- Color: White
- Country of Origin: MX
- Currency: USD
- Dimensions: 4.55 in Dia x 1.55 in D
- Environmental Conditions: Indoor
- EU RoHS Indicator: C
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 0.3800 lb
- Gross Weight per Pack Metric: 0.17
- Gross Weight UOM Metric: kg
- Height: 4.50 in
- Height [Metric]: 11.4300 cm
- Length: 4.50 in
- Length [Metric]: 11.4300 cm
- Mounting: Flush
- Sensing Range: 360 degrees
- Series: CMR
- Standard: cUL, UL
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantUL ListedcULus Listed
- Supply Voltage: 120, 277
- Type: Line Voltage Single Zone
- UNSPSC: 39122236
- UPC 11: 74597586443
- UPC 12: 745975864430
- Warranty Description: 5 Year Limited. Warranty varies by product. See warranty information at: www.acuitybrands.com/resources/terms-and-conditions
- Width: 2.50 in
- Width [Metric]: 6.3500 cm
- Stock Status: NONSTOCK
- Brand: SensorSwitch™
- Manufacturer: Acuity Brands
- Material: Plastic
- Mounting Type: Flush
- Voltage Rating: 120 to 277 VAC
The CMR PC Series of On/Off Photocell sensors provide the industrys most intelligent control of lighting for daylight harvesting applications. Ideal for public spaces with windows like vestibules, corridors, or bathrooms; the sensors work by monitoring daylight conditions in a room, then controlling the lighting so as to insure that adequate lighting levels are maintained. The CMR PC has On/Off lighting control; turning off the lights when sufficient daylight is present and turning them on when additional lighting is necessary. The CMR PC Series sensors are line powered and can switch loads directly without the need for a Power Pack. The CMR PC's enclosure is designed to mount to the ceiling. To add dimming control to the On/Off control provided by the CMR PC, see the Technical Data Sheet on the CMR(B) PC ADC sensor.
- http://www.lithonia.com(Seller Home Page URL)
- Install Instructions 1 URL - 10988_Q65I72TCOS3L1K8N.pdf(Install Instructions 1 URL)
- Install Instructions URL - IC7-001.pdf(Install Instructions URL)
- Spec Sheet URL - 10988_8RLE5S6U23XOTWVY.pdf(Spec Sheet URL)
- Spec Sheet URL - 10988_SUIB47KGTQEA3Y8W.pdf(Spec Sheet URL)
- Spec Sheet URL - CMR(B)%20PC.pdf(Spec Sheet URL)
- Video - https://youtube.com/embed/FOsOlRaDNpA(Video)
- Warranty URL - terms-and-conditions(Warranty URL)
- Applications
- Features
| Conference Room, Corridor, Open Office, Private Office, Restroom |
| The CMR 10 Series incorporates Passive Infrared (PIR) technology into an attractive and economical line powered sensor to provide maximum viewing from the ceiling. When mounted at 9 ft (2.74 m), this sensor views up to 28 ft (8.53 m) in all directions. Its circular coverage pattern is designed for walking motions; making it ideal for T-shaped intersections in corridors, or other areas where wall mounting a sensor is not practical. Low ceiling heights are also best covered with the CMR 10. For example, when mounted at only 7 ft (2.13 m), the height of pick aisles in many distribution centers, the CMR 10 provides a 32 ft (9.75 m) diameter pattern of coverage. In applications where detection of minor motion is also required, the CMR PDT 10 Series Dual Technology sensor is recommended. |
| Self-contained relay, no power pack needed |
| Capable of finding optimum set point |
| Digitally programmable via simple push button commands |
| No minimum load requirements |
| 100 hr lamp burn-in timer mode |
| 14 to 160 deg F temperature range/humidity |
| 1/4 hp motor load |
| Round fixture box/single gang handy box mounting |
| The CMR 10 series incorporates passive infrared (PIR) technology into an attractive and economical line powered sensor to provide maximum viewing from the ceiling |
| When mounted at 9 ft (2.74 m), this sensor views up to 28 ft (8.53 m) in all directions |
| Its circular coverage pattern is designed for walking motion |
| In applications where detection of minor motion is also required, the CMR PDT 10 series dual technology sensor is recommended |
| Ideal for T-shaped intersections in corridors or other areas where wall mounting a sensor is not practical |