Appleton® ARS232BU UNILETS™ ARS Light Fixture, 2 T8RS Fluorescent Lamp, 62 to 60 W Fixture, 120 to 277 VAC, Gray Epoxy Housing

Indoor Ceiling Fixtures
226418 MFG #: ARS232BU
Appleton™
5686.99000 / ea
11043_PIC_ARS232BU
  • Amperage Rating: 0.52 to 0.22 A
  • ARRA Compliant: N
  • Buy American Compliant: N
  • Catalog Number: ARS232BU
  • Country of Origin: MX
  • Currency: USD
  • Dimensions: 48 in L x 15 in W x 8-3/4 in H
  • EU RoHS Indicator: C
  • Gross Weight Per Pack: 77.0000 lb
  • Gross Weight per Pack Metric: 34.93
  • Gross Weight UOM Metric: kg
  • Height: 16.00 in
  • Height [Metric]: 40.6400 cm
  • Housing Material: Copper Free Aluminum
  • Lamp Base Type: Bi-Pin
  • Lamp Wattage: 32 W
  • Length: 55.00 in
  • Length [Metric]: 139.7000 cm
  • Lens Type: Explosionproof/Heat/Impact-Resistant Glass
  • Material: Copperfree (4/10 Of 1 PCT Maximum) Hood
  • Mounting Type: Ceiling
  • Series: ARS
  • Standard: Class I, Division 1 And 2, Groups C, D; Class II, Division 1 And 2, Groups E, F, G; Class III; UL Listed: E10794, 1598, 844, 60079-0, 60079-15; CSA Certified: 65182, C22.2 No. 250, C22.2 No. 137
  • Standards: RoHS CompliantUL 1598844E10794 ListedCSA C22.2 File No. 25013765182 CertifiedClass IDivision 1 and 2Groups CDClass IIDivision 1 and 2Groups EFGClass III Certified
  • Type: Rapid Start Factory Sealed
  • UNSPSC: 39111501
  • UPC 11: 78138107829
  • UPC 12: 781381078290
  • Width: 22.50 in
  • Width [Metric]: 57.1500 cm
  • Stock Status: NONSTOCK
  • Brand: Appleton™
  • Manufacturer: Appleton
  • Fixture Wattage: 64 W
  • Housing Finish: Gray Epoxy
  • Lamp Type: T8-RS Fluorescent
  • Voltage Rating: 120 to 277 VAC
  • Number Of Lamps: 2
Appleton® UNILETS™ Light Fixture, Series: ARS, 120 to 277 VAC, 62 to 60 W Fixture, 0.52 to 0.22 A, T8RS Fluorescent Lamp, 32 W Lamp, Bi-Pin Lamp Base, 2 Lamps, Ceiling Mount, Aluminium Housing, Gray Epoxy Housing, 48 in L
QTY
Add to Wishlist
  • Applications
  • Features
For Use In Wet Locations, Classified Areas Such As Inside Paint Spray Booths, In Pharmaceutical Firms, Paint-Manufacturing Plants, Printing Plants Or Any Location Where Ignitable Dust, Fumes, Gases, Paint Residue, Paint Powder Or Corrosive Atmospheres May Be Present
Factory sealed - external seals not required; Easy to install; Three hubs with two close-up plugs on each end of fixture provide for mounting straight down or at a 45 DEG angle to either side; Explosionproof, impact-resistant and heat-resistant glass tubes protect lamps; Reflectors can easily be removed for replacement or cleaning using only a screwdriver; Supplied with Class P ballasts, equipped with an automatic thermally activated protective device, offering protection against excessive voltage, internal ballast short circuiting, inadequate lamp maintenance and improper fixture application; Non-sparking exterior surfaces for safer operation; 4 FT fluorescent lamp
Factory sealed external seals not required
Easy to install
Three hubs with two close-up plugs on each end of fixture provide for mounting straight down or at a 45 deg angle to either side
Explosionproof, impact-resistant and heat-resistant glass tubes protect lamps
Reflectors can easily be removed for replacement or cleaning using only a screwdriver
Supplied with Class P ballasts, equipped with an automatic thermally activated protective device, offering protection against excessive voltage, internal ballast short circuiting, inadequate lamp maintenance and improper fixture application
Non-sparking exterior surfaces for safer operation
T-6 Temperature rating
3/4 in hub
Explosionproof, dust-ignitionproof
Copper-free aluminum material
Factory sealed