Banner Engineering T18SP6LP Ez-Beam® T18 Photoelectric Sensor, Barrel Shape, 2 m Sensing, Visible red Sensing Beam, PNP Output
Reflex-Reflective, Tubular Style
13619
MFG #: T18SP6LP
BANNER®
130.23000
/ ea
- Amperage Rating: 30 mA
- Catalog Number: T18SP6LP
- Connection Type: Cable
- Country of Origin: UKN
- Enclosure Type: NEMA 6P/IP67
- Environmental Conditions: 90% at 50 deg C
- Gross Weight Per Pack: 1 lb
- Light Source: LED
- Operating Temperature: -40 to 70 °C
- Sensing Method: Retro Reflective
- Series: T18
- Size: 30 mm L x 30 mm W x 41.5 mm H
- Standards: CE Marked, cCSAus certified, Meets MIL-STD-202F requirements, cULus Listed
- UNSPSC: 39121528
- UPC 11: 66248832472
- UPC 12: 66248832472
- Vibration: 10 to 60 Hz
- Voltage Rating: 10 to 30 VDC
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: PNP
- Response Time: 3 ms
- Sensing Beam: Red Laser
- Sensing Range: 2 m
- Shape: Barrel
Banner Engineering Ez-Beam® Photoelectric Sensor, Series: T18, Barrel, Retro Reflective Sensing Method, 2 m Sensing Range, Visible red Sensing Beam, 3 ms Response, PNP Output, 10 to 30 VDC, 30 mA, Cable, LED Light Source, 10 to 60 Hz, 30 mm L x 30 mm W x 41.5 mm H, NEMA 6P/IP67, -40 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C
- Features
Featuring EZ-Beam technology to provide reliable sensing without the need for adjustments; T style plastic housing with 18 MM threaded lens mount; Completely epoxy-encapsulated barrel-mount sensors operate on dc supply voltage and withstand harsh sensing environments; Advanced diagnostics to warn of marginal sensing conditions or output overload; Available in opposed, retroreflective, diffuse and fixed-field modes; Innovative dual-indicator system takes the guesswork out of sensor performance monitoring; 2 green and yellow LED indicators: green on steady - power to sensor is on, green flashing: output is overloaded, yellow on steady - N.O. output is conducting , yellow flashing - excess gain marginal (1 - 1.5x) in light condition; Adjustments: non-polarized retro and diffuse models (only) have a single-turn rear-panel sensitivity control (turn clockwise to incr" |
Self-contained polarized retroreflective mode photoelectric sensor |
Less than 1 uA at 30 VDC off-state output leakage |
3 ms on/off response time |
680 nm visible red LED sensing beam |
Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
2 m cable connection |
PBT polyester housing |
150 mA maximum (each) in standard wiring, less than 1 V at 10 mA DC, less than 1.5 V at 150 mA DC |
Light/dark operate, complementary PNP |
Featuring EZ-Beam technology to provide reliable sensing without the need for adjustments |
Completely epoxy-encapsulated barrel-mount sensors operate on dc supply voltage and withstand harsh sensing environments |
Advanced diagnostics to warn of marginal sensing conditions or output overload |
Available in opposed, retroreflective, diffuse and fixed-field modes |
2 green and yellow LED indicators: green on steady - power to sensor is on, green flashing: output is overloaded, yellow on steady - N.O. output is conducting , yellow flashing - excess gain marginal (1 - 1.5x) in light condition |
Protected against reverse polarity and transient voltages |
Protected against false pulse on power-up and continuous overload or short circuit of outputs |
10 - 60 Hz maximum, double amplitude 0.06 in, maximum acceleration 10g vibration |
T style plastic housing with 18 mm threaded lens mount |
Non-polarized retro and diffuse models (only) have a single-turn rear-panel sensitivity control (turn clockwise to increase gain) adjustments |
18 mm barrel diameter, Self-contained |