Banner Engineering T18SN6LQ Ez-Beam® T18 Photoelectric Sensor, Barrel Shape, 2 m Sensing, Infrared Sensing Beam, NPN Output
Reflex-Reflective, Tubular Style
330152
MFG #: T18SN6LQ
BANNER®
88.07000
/ ea
- Amperage Rating: 25 A
- Catalog Number: T18SN6LQ
- Connection: 4-Pin Euro-Style Quick Disconnect
- Country of Origin: UKN
- Enclosure: IP69K, NEMA 6P, PBT Polyester Housing
- Environmental Conditions: Relative Humidity: 90 PCT At 50 ° C (Non-Condensing)
- Gross Weight Per Pack: 1 lb
- Leakage Current: Off-State Output: Less Than 1 MICAMP At 30 VDC
- Lens: Acrylic
- Operating Temperature: -40 To 70
- Output: NPN
- Size: 30 MM Length X 30 MM Width X 66-1/2 MM Height
- Standards: CE Marked, cCSAus certified, Meets MIL-STD-202F requirements, cULus Listed
- Sub Brand: EZ-BEAM
- Type: T18 Series Self-Contained Non-Polarized Retroreflective Mode Photoelectric Sensor
- UNSPSC: 39121528
- UPC 11: 66248834739
- UPC 12: 66248834739
- Vibration: 10 - 60 HZ Maximum, Double Amplitude 0.06 IN, Acceleration 10G
- Voltage Rating: 10 - 30 V
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Response Time: 3
- Sensing Beam: 950 NMTR Infrared LED
- Sensing Range: 2 A
Banner Engineering Ez-Beam® Photoelectric Sensor, Series: T18, Barrel, Retro Reflective Sensing Method, 2 m Sensing Range, Infrared Sensing Beam, 3 ms Response, NPN Output, 10 to 30 VDC, 25 mA, Quick Disconnect, LED Light Source, 10 to 60 Hz, 30 mm L x 30 mm W x 66.5 mm H, NEMA 6P/IP69K, -40 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C
- Features
| Featuring EZ-Beam technology to provide reliable sensing without the need for adjustments; T style plastic housing with 18 MM threaded lens mount; Completely epoxy-encapsulated barrel-mount sensors operate on dc supply voltage and withstand harsh sensing environments; Advanced diagnostics to warn of marginal sensing conditions or output overload; Available in opposed, retroreflective, diffuse and fixed-field modes; Innovative dual-indicator system takes the guesswork out of sensor performance monitoring; 2 green and yellow LED indicators: green on steady - power to sensor is on, green flashing: output is overloaded, yellow on steady - N.O. output is conducting , yellow flashing - excess gain marginal (1 - 1.5x) in light condition; Adjustments: non-polarized retro and diffuse models (only) have a single-turn rear-panel sensitivity control (turn clockwise to incr" |
| Self-contained non-polarized retroreflective mode photoelectric sensor |
| Less than 1 uA at 30 VDC off-state output leakage |
| 3 ms on/off response time |
| 950 nm infrared LED sensing beam |
| Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 4-pin euro-style quick disconnect connection |
| PBT polyester housing |
| 150 mA maximum (each) in standard wiring, less than 1 V at 10 mA DC, less than 1.5 V at 150 mA DC |
| Light/dark operate, complementary NPN |
| Featuring EZ-Beam technology to provide reliable sensing without the need for adjustments |
| Completely epoxy-encapsulated barrel-mount sensors operate on dc supply voltage and withstand harsh sensing environments |
| Advanced diagnostics to warn of marginal sensing conditions or output overload |
| Available in opposed, retroreflective, diffuse and fixed-field modes |
| 2 green and yellow LED indicators: green on steady - power to sensor is on, green flashing: output is overloaded, yellow on steady - N.O. output is conducting , yellow flashing - excess gain marginal (1 - 1.5x) in light condition |
| Protected against reverse polarity and transient voltages |
| Protected against false pulse on power-up and continuous overload or short circuit of outputs |
| 10 - 60 Hz maximum, double amplitude 0.06 in, maximum acceleration 10g vibration |
| T style plastic housing with 18 mm threaded lens mount |
| Non-polarized retro and diffuse models (only) have a single-turn rear-panel sensitivity control (turn clockwise to increase gain) adjustments |
| 18 mm barrel diameter, Self-contained |