Banner Engineering SME312LPCQD Mini-Beam® Expert™ SME312 Photoelectric Sensor, Rectangle Shape, 1 m Sensing, 0.5 ms Response Time
Reflex-Reflective, Block Style
60422
MFG #: SME312LPCQD
BANNER®
167.71000
/ ea
- Amperage Rating: 45 mA
- Catalog Number: SME312LPCQD
- Connection Type: Quick-Disconnect
- Country of Origin: USA
- Enclosure Type: NEMA 1/2/3/3S/4/4X/6/12/IP67
- Environmental Conditions: 90% at 50 deg C
- Gross Weight Per Pack: 1 lb
- Light Source: LED
- Operating Temperature: -20 to 70 °C
- Sensing Method: Retro Reflective
- Series: SME312
- Size: 84.8 mm L x 12 mm W x 33.3 mm H
- Standards: CE Marked, RoHS Complaint
- UNSPSC: 39121528
- UPC 11: 66248853711
- UPC 12: 66248853711
- Voltage Rating: 10/30 VDC
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: Bi-Polar
- Response Time: 0.5 ms
- Sensing Beam: Red Laser
- Sensing Range: 1 m
- Shape: Rectangular
Banner Engineering Mini-Beam® Expert™ Photoelectric Sensor, Series: SME312, Rectangle, Retro Reflective Sensing Method, 1 m Sensing Range, Visible Red Sensing Beam, 0.5 ms Response, Bi-Polar Output, 10/30 VDC, 45 mA, Quick-Disconnect, LED Light Source, 84.8 mm L x 12 mm W x 33.3 mm H, NEMA 1/2/3/3S/4/4X/6/12/IP67, -20 to 70 deg C Operating, Environmental Conditions: 90 Percent at 50 deg C
- Features
| Rectangular with M18 barrel housing style; Microprocessor-based TEACH-mode sensors, include AID™ function; Easy push-button programming automatically adjusts sensitivity to optimal setting; Easy output programming eliminates the need for Light or Dark Operate selection; Separate TEACH input allows remote programming by an external device, such as a switch or a process controller; The first condition presented during TEACH mode becomes the output ON condition; Protected against reverse polarity, transient voltages and against false pulse on power-up and continuous overload or short-circuit of outputs; Totally encapsulated, o-ring seal and stainless steel screws; Sensing Ranges Vary According To The Efficiency And Reflective Area Of The Retroreflectors Used |
| Microprocessor-based Teach-mode sensors, include AID™ function |
| Easy push-button programming automatically adjusts sensitivity to optimal setting |
| Easy output programming eliminates the need for light or dark operate selection |
| Separate TEACH input allows remote programming by an external device, such as a switch or a process controller |
| The first condition presented during TEACH mode becomes the output ON condition |
| Protected against reverse polarity, transient voltages and against false pulse on power-up and continuous overload or short-circuit of outputs |
| Totally encapsulated, o-ring seal and stainless steel screws |
| Sensing ranges vary according to the efficiency and reflective area of the retroreflectors used |
| Polarized retroreflective clear detection photoelectric sensor |
| Less than 5 uA at 30 VDC off-state output leakage, less than 45 mA |
| 0.5 ms on/off response time |
| 650 nm visible red LED sensing beam |
| Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 5-pin euro-style quick disconnect connection |
| Reinforced thermoplastic polyester enclosure |
| Light/dark operate, 150 mA maximum at 25 deg C derated to 100 mA at 70 deg C, less than 1 V at 10 mA and less than 1.5 V at 150 mA on-state saturation current |
| 18 mm barrel diameter |