Rees 04944-040 Heavy Duty Cable Operated Switch, 1NO-1NC
Cable Pull Switches
76601
MFG #: 04944040
REES
682.94000
/ ea
- Action: Positive Break
- Actuator: T-Handle
- Catalog Number: 04944040
- Contact Rating: 6 A at 110 to 120 VAC, 3 A at 220 to 240 VAC, 1.5 A at 440 to 480 VAC, 1.2 A at 550 to 600 VAC, 2.2 A at 115 to 125 VDC, 1.1 A at 230 to 250 VDC
- Country of Origin: USA
- Dimensions: 3.9 in H
- Enclosure Type: NEMA 12/13/IP65
- Gross Weight Per Pack: 1 lb
- Material: Aluminum
- Mounting Type: Conduit/Surface
- Standards: CE Marked, CSA C22.2 File No LR 3648, Demko No D-01496-M1, IEC/EN 60947-5-1, UL 508 File No E 58589 Listed
- Temperature Rating: 0 to 55 °C
- Terminal Type: 14 AWG Stranded Wire
- Type: Heavy Duty Manual Reset Slack
- UNSPSC: 39122205
- UPC 11: 64867144040
- UPC 12: 64867144040
- Stock Status: NORMALLY STOCKED
- Brand: REES
- Manufacturer: Rees, Inc.
- Contact Configuration: 1NO-1NC
- Voltage Rating: 600 VAC/250 VDC
REES Cable Operated Switch, Heavy Duty, 1NO-1NC, 6/1.2 A at 110/600 VAC/2.2/1.1 A at 115/250 VDC Contact, T-Handle, 14 AWG Stranded Cord, NEMA 12/13/IP65, Surface Mount, 0 to 55 deg C, Aluminum, 3.9 in H
- Catalog URL - IDW_DOCUMENT_ea21e8b71e881e5a746ad9fd0327a5ebf7eeb63fb63b838078a6a39bda09de89.pdf(Catalog URL)
- http://www.reesinc.com/(Seller Home Page URL)
- Spec Sheet URL - A%2004853-900_rev_E.pdf(Spec Sheet URL)
- Tech Drawing URL(Tech Drawing URL)
- Warranty URL - TermsPopup.aspx?cid=3969&plpver=10&pcat=&origin=Plp&lsid=50360424#TermsAndConditions(Warranty URL)
- Features
| The housing is made from high quality die-cast aluminum and powder coated painted yellow; Gold plated contacts eliminate high resistance tarnishing; May be mounted for right or left hand pull; Each captive terminal will accept (2) 14 AWG stranded wires; Each switch is supplied with a fibreflex gasket which provides an oil tight seal upon installation; For added protection against corrosive environments a neoprene gasket is available as an accessory item by ordering part number 02005-540; There are two 1/2 IN NPT conduit openings; The maximum cable recommended cable length is 200 FT with a maximum interval support of 10 FT; This switch can be installed on various conveyor installations and provides a constant access for emergency or normal stopping; The rugged construction and long term reliability makes this cable pull switch well suited to function within variou |