Wiremold® 6ATC2PAL 6IN PREWIRED SURF STYL

Poke-Through Assembled Units
993033 MFG #: 6ATC2PAL
Wiremold®
648.46000 / ea
IDW_IMAGE_1518988687689
  • Application: Commercial Office, Education
  • Cable Entry: CONDUIT
  • Catalog Number: 6ATC2PAL
  • Color: Silver
  • Construction: Assembled
  • Country of Origin: US
  • Cover Material: Die Cast Aluminum
  • Cubic Capacity: 24 CU. IN. in3
  • Depth: 16-3/4 in
  • Device Type: Fire-Rated
  • Finish: Powder Coated
  • Gross Weight Per Pack: 10.0000 lb
  • Insulation: INTUMESCENT
  • Knockout Size: 3/4 to 2 in
  • Length: 7-1/4 in
  • Mounting: STEP ON
  • Series: Evolution™ 6AT
  • Size: 7-1/4X7-1/4X16-3/4
  • Standard: cULus Listed Metallic Outlet Boxes: File E2961 Guide QCIT. cULus Listed Nonmetallic Outlet Boxes & Fittings Classified for Fire Resistance: File R8209 Guide CEYY. Meets Article 300.21, 300.22[C] &314 of NEC.
  • Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantcULus Listed File No. E2961 Guide QCITcULus Listed File No. R8209 Guide CEYYArticle No. 300.21, 300.22 314 NECADA Standard 4.5
  • Sub Brand: Wiremold
  • Suitable For Use With: Carpet, Tile, Wood, Terrazzo, Polished/Finished Concrete Floor
  • Type: Multi-Service Pre-Wired Recessed
  • UNSPSC: 39121328
  • UPC 11: 78656408882
  • UPC 12: 78656408882
  • Width: 7-1/4 in
  • Stock Status: NONSTOCK
  • Brand: Wiremold®
  • Manufacturer: Legrand
  • Capacity: 24 in³
  • Hole Size: 6 in
  • Material: Plastic/Steel
  • Number of Gangs: 3
For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, (BZ) bronze, and (AL) aluminum. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.), One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Finish - Aluminum
QTY
Add to Wishlist
  • Applications
  • Features
Commercial Office, Education
DIE CAST ALUMINUM COVER, SLIDE EGRESS DOORS, 180 DEGREE COVER ROTATION, COVER DESIGNED TO SIT ON TOP OF FINISHED FLOOR SURFACE, 3 GANGS OF SERIVCES, 2 PREWIRED PRELOADED DUPLEX REC, JUNCTION BOX INCLUDED
Pre-wired assembly save on labor with a completely assembled, Pre-wired poke-thru with every power receptacle already installed
Recessed devices provide maximum protection - all power, communications and AV devices are recessed below floor level, providing maximum protection and device longevity
Step-on-it installation - quick and easy installation without the need for additional fasteners or a second installer
The cover opens a full 180 deg with two unique spring-loaded slide egress doors to keep wires, connections and people safe
Flush tile version cover assemblies - a flush style cover for tile applications allows the Evolution™ series poke-thru devices to be adjusted to the same level as the top surface of the floor covering
Open system for expanded compatibility - accepts industry standard power, communications and A/V devices from most manufacturers including Legrand AVIP, Extron® and more
Plug load control up to 30 ft - tested with Pass & Seymour® wireless RF receptacles to control plug loads up to a distance of 30 ft when the cover is closed
Evolution™ series poke-thru devices use an intumescent material that maintains the fire rating of any floor for up to 2 hr