Powerswitch® 330MI7W Non-Fused Watertight Mechanical Interlock Device, 480 VAC, 30 A, 2 Poles, 3 Wires
Pin & Sleeve Mechanical Interlock Device
942554
MFG #: 330MI7W
Leviton®
1088.98000
/ ea
Powerswitch® mechanical interlock devices incorporate a safety disconnect switch and IEC receptacle in a non-metallic watertight enclosure. The interlock mechanism prevents making and breaking of power under load. The switch cannot be actuated to the ON position until an IEC compatible plug is fully inserted and the plug cannot be removed until the switch is in the OFF position. The complete IEC 60309 system of plugs, connectors, inlets and mechanical interlock devices can be used for both retrofit and new installations for enhanced safety and performance in critical power connections.
- Catalog URL - Leviton_00PC60_Catalog.pdf(Catalog URL)
- http://www.leviton.com(Seller Home Page URL)
- Line Drawing URL(Line Drawing URL)
- Safety Data Sheet URL - MSDS.pdf(Safety Data Sheet URL)
- Spec Sheet URL - ProductDetail.jsp?partnumber=330MI7W§ion=40080&minisite=10251(Spec Sheet URL)
- Tech Drawing URL - 10962_WP62K1UNYQZ7XJGC.jpg(Tech Drawing URL)
- Applications
- Features
| Industrial |
| Engineered to IP67 watertight and IP69K high pressure, high temperature washdown standards |
| Fused models accept class J? time delay fuses |
| Exposed plastic materials are UV stabilized |
| -40 to 60 deg C operating temperature |
| 20, 30, 60 A non-fused and fused |
| For use with North American pin and sleeve receptacle |
| Exposed plastic materials are UV-stabilized |
| 6000 cycles inductive motor type load endurance |
| 1000 V plus rated voltage for 1 min dielectric voltage |
| Valox 357 cover with arm, locking ring, handle and locking mechanism, nickel-plated brass cover eyelet, chloroprene gasket, zinc-coated steel actuator, internal screws and conduit grounding plate, nylon contact carrier, brass phase and ground sleeves, ground contacts and switch terminal contacts, cadmium-free silver-alloy switch contacts and stainless steel housing screws material |
| 18 lb pull on internal wires pullout |
| Certified for current interrupting at full rated current |
| 110% of specified tightening torque on terminal screws strength of insulating base and support |
| 1.2 lb ball dropped from 5 ft impact |
| 100 lbs crush test rating |
| 70C for 168 hr gasket aging |
| 70 deg C for 7 hr mold stress relief |
| 10 hp AC horsepower rating |