Fluke® 80I-110S AC/DC Current Clamp, 300/600 VAC, 10/100 A, CAT II 600 V/CAT III 300 V
Test Probes
421619
MFG #: 80I-110S
Fluke®
1061.99000
/ ea
The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.
- Brochure URL - 80i-110s-Spexs.pdf(Brochure URL)
- Catalog URL - IDW_DOCUMENT_a120db1341d3ecff82a1bf7c0e8960b8c4a98b83724b184e36899a15e6cfb616.pdf(Catalog URL)
- http://www.fluke.com(Seller Home Page URL)
- http://www.fluke.com/(Seller Home Page URL)
- Install Instructions URL - ID-INS-FLK-3000FC_TPAK.pdf(Install Instructions URL)
- Owners Manual URL - 11095_VG9AOKS3W24EIUHX.jpg(Owners Manual URL)
- Owners Manual URL - IDW_DOCUMENT_1520617856930.pdf(Owners Manual URL)
- Spec Sheet URL - 11095_Spec sheet reference.pdf(Spec Sheet URL)
- Spec Sheet URL - 80i110s_iseng0100.pdf?XFS2MXiqNYqJX6B5U47dUNjZ575.U_sv(Spec Sheet URL)
- Applications
- Features
| Measure current with Fluke Scopemeter |
| Hard plastic enclosure |
| Nominal current range - 10 A, AC/DC, 100 A, AC/DC, Continuous current range 0.1 A - 10 A AC/DC, 1 A - 100 A AC/DC |
| Maximum non-destructive current 140 A - 2 kHz AC/DC |
| Lowest measurable current 0.1 A |
| Basic accuracy 100 mV/A setting - 50 mA to 10 A +/- 3% of reading +50 mA, 10 mV/A setting - 50 mA to 40 A +/-4% of reading +50 mA, 40 A to 80 A +/- 12% of reading +50 mA, 80 to 100 A +/- 15% of reading |
| Useable frequency - DC - 100 kHz |
| Output level(s) - 10 A range - 100 mV/A, 100 A range - 10 mV/A |
| 9 V, 55 h battery life |
| 1.6 m output cable length |