Decora® ODS10-IDW 1-Pole Single Relay Wall Mount Occupancy Sensor, 120/230/277 VAC, Passive Infrared Sensor, 180 deg
Occupancy or Motion Sensing Switch
7856
MFG #: ODS10-IDW
Decora®
47.84000
/ ea
The Leviton Decora® wall switch passive infrared (PIR) occupancy sensor (ODS10-ID) uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented fresnel lens. This specialized lens divides the field-of-view into sensor zone. When a person passes into or out of a sensor zone the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zone.
- http://www.leviton.com(WEB SELLER HOME PAGE URL)
- Video - https://www.youtube.com/embed/jK48BrNhHBw&rel=0(Video)
- WEB SDS URL - MSDS.pdf(WEB SDS URL)
- WEB SPEC SHEET 1 URL - Decora_ODS10_IDG_Datasheet_1.pdf(WEB SPEC SHEET 1 URL)
- WEB SPEC SHEET URL - ODS10-IDW.pdf?products=ODS10-IDW&locale=en(WEB SPEC SHEET URL)
- WEB TECH BULLETIN URL - Leviton_ODC0P_W_Technical_Bulletin.pdf(WEB TECH BULLETIN URL)
- Applications
- Features
| Small Offices, Conference Rooms, Lounges and Classrooms |
| Neutral wire not required |
| Grounding wire required |
| External power pack not required |
| Commercial grade and internal photocell |
| Ambient light Override |
| 800 W at 120 VAC primary relay incandescent, 1200VA at 120 VAC, 2700VA at 277 VAC primary relay fluorescent, 1/4 hp at 120 VAC motor load ratings |
| -10 to 85 deg C storage temperature range |
| 20% to 90% non-condensing relative humidity |
| For indoor use only |
| Fits in standard wallbox and replaces single-pole wall switch |
| Low-profile design eliminates obtrusive "scanning-device" look |
| 180 deg field-of-view provides approximately 2100 square feet of coverage |
| Convenient pushbutton provides manual-on/off light switching at any time |
| Two dual element PIR sensors used to widen detection range |
| Vandal resistant PIR lens |
| Manual-on/auto-off mode for installations where manual-on switching is required but auto-off switching is still desired for CEC Title 24 energy savings |
| Light sensor enables the load hold-off feature once level has been set |
| False detection circuitry |
| Motor load type |
| Fits in Standard Wallbox and Replaces Single-Pole Wall Switch, 180? Field-Of-View Provides Approximately 195m2 of Coverage Suitable for Small Offices, Conference Rooms, Classrooms, Lounges and a Variety of Commercial Areas, Convenient Pushbutton Provides |