Appleton® MLSL155G1GMT Mercmaster III ML Series Low Profile HID Lighting Fixture With Globe and Cast Guard, High Pressure Sodium Lamp

Explosion Proof Outdoor Lighting
380008 MFG #: MLSL155G1GMT
Appleton™
1595.73000 / ea
11043_PIC_MLSL154J5NMT
The Mercmaster III low profile luminaires feature a compact, lightweight, low profile design that is suited for low mounting heights in conjunction with lower wattage fixtures. These enclosed and gasketed fixtures are suitable for hazardous and adverse locations where flammable gases and vapors, combustible dusts, severe weather conditions or excessive moisture or dirt are present.
QTY
Add to Wishlist
  • Applications
  • Features
Enclosed And Gasketed Fixtures Suitable For Use In Marine And Wet Locations, And In A Wide Range Of Industrial, Chemical Processing And Other Areas Where Flammable Gases And Vapors Or Combustible Dusts Are Present, Areas Of Low Clearance, Low Ceiling Heights Or Where Fixture Weights Must Be Minimized, R Use In Non-Hazardous Locations Where Severe Weather Conditions, Excessive Moisture, Dirt, Dust Or Corrosive Atmospheres Are Present, Oil Refineries, Pulp And Paper Mills, Chemical Plants, Food-Processing Areas, Inspection Facilities, Foundries, Power Plants, Storage Areas, Waste And Sewage Treatment, Parking Garages, And Other Areas Where Dust, Water, Dirt And Rough Usage Are A Problem
The Mercmaster III series provides a wide selection of high quality enclosed and gasketed luminaires for use in demanding industrial environments and hazardous locations; Compact light weight low profile design is suited for low mounting heights in conjunction with lower wattage fixtures; Modular design allows scores of fixture component combinations to meet installation and lighting needs; Hinge has high lip for added safety during installation and servicing; Hinge and bolt construction ensures 360 DEG compression at all points on ballast housing gasket for positive sealing; Swing away design of captive bolt and nut simplifies servicing; Fixtures are for use in Class I, Zone 2 hazardous locations
Compact lightweight low profile design is suited for low mounting heights in conjunction with lower wattage fixtures
Modular design allows scores of fixture component combinations to meet installation and lighting needs
A choice of heat-resistant prismatic glass refractors (NEMA I, III or V) or heat-resistant globes which thread directly into ballast housing
Standard dome or 30 deg angle reflectors made of fiberglass reinforced white polyester, highly resistant to corrosive atmospheres
Hinge has high lip for added safety during installation and servicing
Hinge and bolt construction ensures 360 deg compression at all points on ballast housing gasket for positive sealing
Swing away design of captive bolt and nut simplifies servicing
All Mercmaster™ III mounting hoods have provision for easy field installation of fuses in fixtures
Fixtures are for use in Class I, Zone 2 hazardous locations
No seals or putty required, reducing installation time and errors
2 A at 120 VAC, 1.15 A at 208 VAC, 1 A at 240 VAC, 0.85 A at 277 VAC starting, 1.7 A at 120 VAC, 0.95 A at 208 VAC, 0.85 A at 240 VAC, 0.72 A at 277 VAC operating
1 hub
1-1/2 in NPT stanchion hub
40 deg C ambient temperature, 90 deg C supply wire temperature
All hardware and catch assemblies stainless steel, body gaskets and globe gaskets are high temperature silicone rubber
Fiberglass reinforced white polyester reflectors
Heat-resistant prismatic glass globes and refractors
High power factor (min PF 90%)
Baked gray epoxy clad finish, electrostatically applied for complete uniform protection mounting hoods, bodies and guards
1 ballast quantity