Appleton® KPCL1575GMT KP Series Ceiling Lighting Fixture With Guard, 1 High Pressure Sodium Lamp, 188 W Fixture, 120/208/240/277 VAC

Outdoor Ceiling Lighting
84862 MFG #: KPCL1575GMT
Appleton™
1672.67000 / ea
Appleton® Ceiling Lighting Fixture, Series: KP Series, 120/208/240/277 VAC, 188 W Fixture, 0.72 A, High Pressure Sodium Lamp, 150 W Lamp, Mogul Lamp Base, 1 Lamp, HX-HPF Ballast, Glass Lens, 16000 Lumens, NEMA 4X, IP66, Aluminium Housing, Epoxy Powder Coated Housing, 13.62 in L x 13.62 in W
QTY
  • Applications
  • Features
For Use In Marine And Wet Locations, Areas Where Flammable Gases And Vapors Or Combustible Dusts Are Present Under Conditions Defined By The National Electrical Code , Non-Hazardous Locations Where Severe Weather Conditions, Excessive Moisture, Dirt, Dust Or Corrosive Atmospheres Are Encountered, Pulp And Paper Mills, Processing Plants, Chemical Plants, Oil Refineries, Foundries, Manufacturing Plants, Storage Areas, Marine Applications
The Mercmaster III series provides a wide selection of high quality enclosed and gasketed luminaires for use in demanding industrial environments and hazardous locations; Epoxy powder coat finish electrostatically applied for complete uniform corrosion protection; Modular design allows scores of fixture component combinations to meet installation and lighting needs; Many most used combinations are offered prewired and assembled, complete with lamp, packaged in a single carton and ready to install; Hinge has high lip for added safety during installation and servicing; Hinge and bolt construction ensures 360 DEG compression at all points on ballast housing gasket for positive sealing; Swing away design of captive bolt and nut simplifies servicing; Body gaskets and globe gaskets are high temperature silicone rubber; Capacitors are non-PCB type, thermally isolated from ballast; Mogul base porcelain socket with nickel-plated contacts has 200 DEG C welded leads, prewired to the ballast to en
The Mercmaster™ III series provides a wide selection of high quality enclosed and gasketed luminaries for use in demanding industrial environments and hazardous locations, heat resistant prismatic glass globe
Many most used combinations are offered prewired and assembled, complete with lamp, packaged in a single carton and ready to install
Hinge has high lip for added safety during installation and servicing
Swing away design of captive bolt and nut simplifies servicing
Body gaskets and globe gaskets are high temperature silicone rubber
Capacitors are non-PCB type, thermally isolated from ballast
Mogul base porcelain socket with nickel plated contacts has 200 deg C welded leads, prewired to the ballast to ensure trouble free operation in high ambient temperatures
Ground wire provided to bond hood and ballast housing for electrical protection
One-piece ballast housing for each component provides even heat
One-piece ballast housing for each component provides even heat
Copper free cast aluminum (less than 4/10 of 1 pct) mounting hoods, ballast bodies and guards, stainless steel hardware and latch assemblies
0.85 A starting, 0.72 A operating at 277 VAC amperage rating
Prismatic glass lensCopper free cast aluminum material