Appleton® KPCHL1575J5GMT Mercmaster III 250 KP Series HID Luminaire With 8 in NEMA 5 Glass Refractor and Globe Guard, 188 W Fixture

Explosion Proof Outdoor Lighting
722326 MFG #: KPCHL1575J5GMT
2131.55000 / ea
The Mercmaster III series provides a wide selection of high quality enclosed and gasketed luminaires for use in demanding industrial environments and hazardous locations.
  • Features
Modular design allows scores of fixture component combinations to meet installation and lighting needs and many most-used combinations are offered prewired and assembled, complete with lamp, packaged in a single carton and ready to install
Choice of heat-resistant prismatic glass refractors (NEMA distributions I, III and V), or heat-resistant prismatic glass globes for hazardous area fixtures
Colored and clear polycarbonate globes and Tuff-skin® coated glass globes are available but are NOT approved for use in classified areas
Fixtures with these globes do NOT comply with code requirements, and should be used in non-classified areas only
Globes and refractors thread directly into ballast housing
Mounting hoods include cone-shaped pendant hood, standard pendant, flexible pendant, ceiling and wall pendants (tapped for 3/4 in or 1 in NPT), 25 deg angle stanchion, and 90 deg (straight) stanchion (both tapped for 1-1/4 in or 1-1/2 in NPT)
Cone hood fixtures for pendant mounting shed dust, dirt and combustible fibers, cone hood inhibits build-up that "insulates" fixture and slows heat transfer, and provides increased surface area for more effective heat dissipation
Reflector choice includes standard dome and 30 deg angle types, both made of fiberglass reinforced white polyester, highly resistant to unusually corrosive applications
Reflectors are vented for cooler, dirt-free operation and maintained lumen output, they secure to ballast housing with stainless steel screws threading into stainless steel inserts
For high corrosion resistance, fixture housing, mounting hoods and guards are copperfree cast aluminum with baked epoxy finish, electrostatically applied for uniformity, all exposed hardware is stainless steel
Hinge has high lip for added safety during installation and servicing
Body gaskets and globe gaskets are high temperature silicone rubber, capacitors are non-PCB type, thermally isolated from ballast
Mogul base porcelain socket with nickel plated contacts has 200 deg C (392 deg F) welded leads, prewired to the ballast, assures trouble-free operation in installations where high ambient temperatures are encountered
HPS ballasts are high power factor (min PF 90%)
For electrical protection, a ground wire is provided on each Mercmaster to bond hood and ballast housing
Copperfree cast aluminum (less than 4/10 of 1%) mounting hoods, ballast bodies and guards
Stainless steel, latch assemblies have stainless steel bolt and captive nut; reflectors and guards attach with stainless steel screws threading into stainless steel inserts exposed hardware, white polyester reflector
1 hub
3/4 in NPT hub
60 Hz frequency