Appleton® Contender® EDS Unilet® EDS2192UM1 Dead End Pushbutton Switch Control Station, 600 VAC, 10 A, 1 Operator
Explosion Proof Control Stations
326275
MFG #: EDS2192UM1
Appleton™
449.76000
/ ea
Appleton® Contender® EDS Unilet® Pushbutton Switch Control Station, Dead End, 600 VAC, 10 A, 1 Operator, Maintained Contact Mode, Front Operated Button Operator, Start/Stop Legend, Threaded, NEMA 3/7CD/9EFG, Surface Mount, Malleable Iron, Tri-Coated, 6.51 in H x 3.72 in W x 5.94 in D
- http://www.appletonelec.com(Seller Home Page URL)
- Seller Home Page URL - appleton(Seller Home Page URL)
- Spec Sheet 1 URL - ID-SPE-v1-781381698900_Spec.pdf(Spec Sheet 1 URL)
- Spec Sheet URL - 11043_SPE_781381698900_Spec.pdf(Spec Sheet URL)
- Spec Sheet URL - SPE_781381698900_Spec.pdf(Spec Sheet URL)
- Warranty URL - 11043_AFRVNTEYP0B9JHS4.pdf(Warranty URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Applications
- Features
| For Remote Control Of Motors |
| Covers are UL Listed when used on Contender bodies; Ground screw installed in bodies for ground continuity; Corrosion resistant stainless steel hex head captive screws hold covers to body; Factory sealed enclosure eliminates need for adding sealing fittings and compound at each conduit entrance; Stainless steel push button shaft operates within stainless steel bushing assuring long, maintenance free operation; Smooth, rounded integral bushing in each hub protects conductor insulation; Push button and selector switch contacts are silver cadmium oxide which are sealed in lower phenolic chamber isolated from corrosive elements |
| Finish is epoxy powder coat for enhanced corrosion resistance |
| Large backbox for ample wiring room |
| Ground screw installed in bodies for ground continuity |
| Corrosion resistant stainless steel hex head captive screws hold covers to body |
| Factory sealed enclosure eliminates need for adding sealing fittings and compound at each conduit entrance |
| Factory sealed pilot lights supplied with jewel/guard assembly and 120 Vac/Vdc, 50/60 Hz, 6 Watt lamp (LED provided as option) |
| Dozens of possible combinations of push buttons, pilot lights and selector switches |
| Accurately tapped, tapered hubs for tight rigid joints and ground continuity |
| Stainless steel push button shaft operates within stainless steel bushing assuring long, maintenance free operation |
| Smooth, rounded integral bushing in each hub protects conductor insulation |
| Push button and selector switch contacts are silver cadmium oxide which are "sealed" in lower phenolic chamber isolated from corrosive elements |
| Assures positive contact and long, trouble free operation |
| Enclosed stainless steel helper spring prevents accidental operation of push button in severe vibration installations |
| All momentary push buttons are supplied with lockout type guards as standard |
| Hole in guard will accept locks with up to 1/4 in hasp |
| Permits locking of push button to prevent unauthorized operation |
| Clearly marked terminals with brass screws and spade terminals assure quick, easy wiring |
| 1 gang |
| 2 circuits, Triple coat-(1) zinc electroplate, (2) chromate, and (3) epoxy powder coat, 3/4 in hub |
| Explosionproof, dust-ignitionproof, hazardous location |