Appleton® BLR200-M Unilet® BLR200M Type LR Conduit Body, 2 in Hub, 134 cu-in, Malleable Iron, Tri-Coated
Type LR Conduit Fitting Body
284859
MFG #: BLR200M
Appleton™
421.05000
/ ea
- http://www.appletonelec.com(Seller Home Page URL)
- https://www.appleton.emerson.com/(Seller Home Page URL)
- Seller Home Page URL - appleton(Seller Home Page URL)
- Spec Sheet URL - 11043_SPE_AEC_MC007_NEC_6x8x_Series_C_LB_UB_and_LL_LR_T_Mogul_Bodies.pdf(Spec Sheet URL)
- Spec Sheet URL - SPE_AEC_MC007_NEC_6x8x_Series_C_LB_UB_and_LL_LR_T_Mogul_Bodies.pdf(Spec Sheet URL)
- Warranty URL - 11043_AFRVNTEYP0B9JHS4.pdf(Warranty URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Applications
- Features
For Use With Rigid Metal Conduit And IMC |
Exclusive built-in rollers facilitate cable pulling; Smooth, rounded integral bushing in each hub protects conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and ground continuity; Covers have captive stainless steel screws to speed installation, prevent freezing of screws; Length Requirement: distance between centerline of each hub bushing (conduit stop) exceeds six times the trade diameter of the conduit per NEC 314.28(A)(2); Bending space requirement: These moguls also meet the NEC 314.28(A)(2) exception requirement spelled out in NEC 312.6(A) table; The second hub is in the side LR right instead of the back; Larger body size facilitates pulling of large and heavy conductors; Specially designed raised cast covers provide additional wiring area; Wiring capacity: 134 CU-IN |
Larger body size facilitates pulling of large and heavy conductors |
Specially designed raised cast covers provide additional wiring area |
Mogul UNILETS™ for pulling straight, 45 or 90 deg angle turns and/or making taps and splices |
Exclusive built-in rollers facilitate cable pulling |
Smooth, rounded integral bushing in each hub protects conductor insulation |
Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity |
Covers have captive stainless steel screws to speed installation, prevent freezing of screws |
Mogul have an end hub |
The second hub is in the side (LL left and LR right) instead of the back |
For use with threaded rigid/IMC metal conduit |
Triple coated (zinc electroplated, chromate and epoxy powder coated) |
Length requirement distance between centerline of each hub bushing (conduit stop) exceeds six times the trade diameter of the conduit per NEC 314.28(A)(2) |