Telemecanique ZENL1121 Auxiliary Contact Block, 1 Poles, 1NC, 12 A at 600 VAC/VDC, For Use With XAL Series Control Stations, Silver Alloy Contact

Switch Contact Blocks
143467 MFG #: ZENL1121
Square D™
16.40000 / ea
11b57b49649b433cf5b17f8b5c1fb880b1c3848a-large
  • Action: 1 NC;Slow-break
  • Alternate Catalog Number: ZENL1121
  • Amperage Rating: 3 A 240 V, AC-15, A600 EN/IEC 60947-5-1-6 A 120 V, AC-15, A600 EN/IEC 60947-5-1-0.1 A 600 V, DC-13, Q600 EN/IEC 60947-5-1-0.27 A 250 V, DC-13, Q600 EN/IEC 60947-5-1-0.55 A 125 V, DC-13, Q600 EN/IEC 60947-5-1-1.2 A 600 V, AC-15, A600 EN/IEC 60947-5-1
  • Application: For XAPS control station;for XB5 Ø 22 mm control and signalling units
  • ARRA Compliant: N
  • Buy American Compliant: N
  • Catalog Number: ZENL1121
  • Connection: Screw clamp terminals
  • Control Output: 1 NC
  • Country of Origin: FR
  • Currency: USD
  • Enclosure: IP20
  • EU RoHS Indicator: Y
  • Gross Volume Per Pack: 0.43
  • Gross Volume per Pack Metric: 7.05
  • Gross Volume UOM: CI
  • Gross Volume UOM Metric: cm3
  • Gross Weight Per Pack: 0.0200 lb
  • Gross Weight per Pack Metric: 9.00
  • Gross Weight UOM Metric: g
  • Harmonization Tariff Schedule Code: 8536490065
  • Height: 2.18 in
  • Height [Metric]: 5.6000 cm
  • Item Group: 22475
  • Length: 2.11 in
  • Length [Metric]: 5.4000 cm
  • Material Composition Declaration: https://checkaproduct.se.com/DistantRequestDispatcher.aspx?action=export&pid=650056&lang=en-us
  • Mounting: Rear
  • Operating Temperature: -40-70 A°C
  • Returnable: Y
  • Standard: EN/IEC, CSA, UL LISTED
  • Standards: EN/IEC 60947-5-5, UL 508 Listed, EN/IEC 60947-5-4, EN/IEC 60947-5-1, CSA C22.2 No 14 Certified, JIS C 4520, EN/IEC 60947-1 Standard
  • Sub Brand: ZENL
  • Substitute Product Catalog Number: ZB5AZ905
  • Terminal Type: Screw/Clamp
  • Type: Auxiliary
  • UNSPSC: 39121565
  • UPC 11: 78590137751
  • UPC 12: 785901377511
  • Voltage Rating: 600 V
  • Warranty Description: Contractual Warranty:18 months
  • Width: 1.72 in
  • Width [Metric]: 4.4000 cm
  • Stock Status: NORMALLY STOCKED
  • Brand: Square D™
  • Manufacturer: Schneider Electric
  • Contact Configuration: 1NC
  • Contact Material: Silver Alloy
  • Contact Rating: 12 A at 600 VAC/VDC
  • Suitable For Use With: XAL Series Control Stations
  • Number Of Poles: 1
Schneider Electric ZENL1121 STANDARD CONTACT BLOCK, 1 N/C,1 NC,1000000 cycles,600 V,Contact block,EN/IEC, CSA, UL listed,For XB5 22 mm control and signalling units, For XAPS control station,Harmony,IP20,Rear,Screw clamp terminals
QTY
Add to Wishlist
  • Applications
  • Features
For XAPS control station;for XB5 Ø 22 mm control and signalling units
1 NC
Single contact block type
Slow-break contacts operation
1.5 mm (NC changing electrical state), 4.3 mm (total travel) operating travel
2 N (NC changing electrical state) operating force
10 A fuse protection by cartridge fuse type gG short circuit protection
<= 2 x 1.5 mm2 with cable end conforming to EN 60947-1 screw clamp terminals, >= 1 x 0.22 mm2 without cable end conforming to EN 60947-1 screw clamp terminals connections terminals
<= 25 M ohm resistance across terminals
0.8 to 1.2 N.m tightening torque conforming to EN 60947-1
3 A at 240 V, AC-15, A600 conforming to EN/IEC 60947-5-1, 6 A at 120 V, AC-15, A600 conforming to EN/IEC 60947-5-1, 0.1 A at 600 V, DC-13, Q600 conforming to EN/IEC 60947-5-1, 0.27 A at 250 V, DC-13, Q600 conforming to EN/IEC 60947-5-1, 0.55 A at 125 V, DC-13, Q600 conforming to EN/IEC 60947-5-1, 1.2 A at 600 V, AC-15, A600 conforming to EN/IEC 60947-5-1 rated operational current
1000000 cycles, AC-15, 2 A at 230 V, 1000000 cycles, AC-15, 3 A at 120 V, 1000000 cycles, AC-15, 4 A at 24 V, 1000000 cycles, DC-13, 0.2 A at 110 V, 1000000 cycles, DC-13, 0.5 A at 24 V, 3600 cyc/h operating rate, 0.5 load factor conforming to EN/IEC 60947-5-1 electrical durability